| POWER SUPPLY | Internal | via backplane |
| Power dissipation | 3 W max |
| CONNECTIONS | Rack | Card-edge |
| I/O Ports | 2 polarized plug-in connectors, male, 24 pin (2 rows of 12 pins) * |
| DISPLAY ELEMENTS | Diagnostic | Alarm red LED Yellow LED for power potentiometer |
| ANALOG INPUT | Number | 6, configurable as single-ended voltage 0…10 V, single ended volt- age ±10 V, potentiometer or current 0…20mA |
| ANALOG INPUT IN VOLTAGE 0…10 V | Max number | 6 |
| Type | Single-ended voltage 0…10 V |
| Input filter | Low-pass, 3rd order Cut-off frequency: 100 Hz, 1 kHz, 10 kHz selectable via software |
| Input impedance | > 1 MΩ |
| Sampling time (for all channels) | < 250 μs |
| Output format | Type: UINT Resolution: 14 bit (0 … 16 384) LSB: 0,61 mV |
| Max error @ 25 °C | 0,5% full scale |
| Protections | Over-voltage: max 1 kV for 1 ms |
| Electrical isolation | Channel – channel: no Channel – bus CPU: 2 kV |
| ANALOG INPUT IN VOLTAGE ±10 V | Max number | 6 |
| Type | Single-ended voltage ±10 V |
| Input filter | Low-pass, 3rd order Cut-off frequency: 100 Hz, 1 kHz, 10 kHz selectable via software |
| Input impedance | > 1 MΩ |
| Sampling time (for all channels) | < 250 μs |
| Output format | Type: INT Resolution: 15 bit (-16 384 … +16 384) LSB: 0,61 mV |
| Max error @ 25°C | 0,5% full scale |
| Protections | Overvoltage: max 1 kV per 1 ms |
| Electrical isolation | Channel – channel: no Channel – bus CPU: 2 kV |
| ANALOG INPUT IN CURRENT 0…20 mA | Max number | 6 |
| Type | Current 0…20 mA |
| Input filter | Low-pass, 3rd order Cut-off frequency: 100 Hz, 1 kHz, 10 kHz selectable via software |
| Input impedance | 100Ω, 0,1% |
| Sampling time (for all channels) | < 250 μs |
| Output format | Type: UINT Resolution: 14 bit (0 … 16 384) LSB: 1,22 mA |
| Max error @ 25 °C | 0,3% full scale |
| Protections | Overvoltage: max 1 kV per 1 ms |
| Electrical isolation | Channel – channel: no Channel – bus CPU: 2 kV |
