| General specifications |
|---|
| AS-Interface specification | V3.0 |
| PLC-Functionality | activateable |
| Duplicate address detection | from AS-Interface slaves |
| Earth fault detection | integrated |
| EMC monitoring | integrated |
| Diagnostics function | Extended function via display |
| UL File Number | E223772 only from low voltage, limited energy source (SELV or PELV) or listed Class 2 source |
| Functional safety related parameters |
|---|
| MTTFd | 105 a at 30 °C |
| Indicators/operating means |
|---|
| Display | Illuminated graphical LC display for addressing and error messages |
| LED ETHERNET | ethernet active; LED green |
| LED AS-i ACTIVE | AS-Interface operation normal; LED green |
| LED CONFIG ERR | configuration error; LED red |
| LED PRG ENABLE | autom. programming; LED green |
| LED POWER | voltage ON; LED green |
| LED PRJ MODE | projecting mode active; LED yellow |
| LED U AS-i | AS-Interface voltage; LED green |
| Button | 4 |
| Electrical specifications |
|---|
| Insulation voltage | ≥ 500 V |
| Rated operating voltage | from AS-Interface 30 V DC |
| Rated operating current | ≤ 300 mA from AS-Interface |
| Interface 1 |
|---|
| Interface type | 2 x RJ-45 |
| Protocol | EtherNet/IP + MODBUS TCP/IP acc. to IEEE 802.3
supports device level ring protocol DLR |
| Transfer rate | 10 MBit/s / 100 MBit/s , Automatic baud rate detection |
| Interface 2 |
|---|
| Interface type | RS 232, serial
Diagnostic Interface |
| Transfer rate | 19,2 kBit/s |
| Interface 3 |
|---|
| Interface type | Chip card slot |
| Connection |
|---|
| Ethernet | RJ-45 |
| AS-Interface | spring terminals, removable |
| Directive conformity |
|---|
| Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 62026-2:2013 EN 61000-6-2:2005, EN 61000-6-4:2007 |
| Standard conformity |
|---|
| Electromagnetic compatibility | EN 61000-6-2:2005, EN 61000-6-4:2007 |
| Degree of protection | EN 60529:2000 |
| AS-Interface | EN 62026-2:2013 |
| Shock resistance | EN 61131-2:2004 |
| Standards | EN 61000-6-2:2005, EN 61000-6-4:2007 EN 954-1:1996 (up to Kategorie 4), IEC 61508:2001 and EN 62061:2005 (up to SIL3) EN 13849:2008 (PL e) |
| Approvals and certificates |
|---|
| EAC conformity | TR CU 020/2011 |
| UL approval | An isolated source with a secondary open circuit voltage of ≤ 30 VDC with a 3 A maximum over current protection. Over current protection is not required when a Class 2 source is employed.
UL mark does not provide UL certification for any functional safety rating or aspects of the device. |
| Ambient conditions |
|---|
| Ambient temperature | 0 … 55 °C (32 … 131 °F) |
| Storage temperature | -25 … 85 °C (-13 … 185 °F) |
| Mechanical specifications |
|---|
| Degree of protection | IP20 |
| Mass | 500 g |
| Construction type | Low profile housing , Stainless steel |
