Description
Datasheet excerpt: Technical data of VB14N-300
| Product Description |
|---|
| Barcode scanner |
| General specifications |
|---|
| Light source | laser diode |
| Light type | modulated visible red light |
| Laser nominal ratings | |
| Note | LASER LIGHT , DO NOT STARE INTO BEAM |
| Laser class | 2 |
| Wave length | 650 nm |
| Beam divergence | < 1.5 mrad |
| Pulse length | 1.3 ms |
| Repetition rate | 200 Hz |
| max. pulse energy | 1.19 µJ |
| Scan rate | 500 … 800 s-1 |
| Read distance | 40 … 300 mm |
| Angle of divergence | 50 ° |
| Optical face | front or on side (with deviation mirror) |
| Resolution | 0.2 mm ( 8 mils ) |
| Indicators/operating means |
|---|
| Operation indicator | LED blue: Power on, LED green: Ready to read (READY), LED green: Read successfully (GOOD), LED yellow: External trigger signal pending (TRIGGER), LED yellow: Communication active (COM), LED red: “no read” (STATUS) |
| Electrical specifications |
|---|
| Operating voltage | 10 … 30 V DC |
| Power consumption | max. 3 W |
| Interface |
|---|
| Interface type | serial , RS-232 and RS-485 up to 115.2 kBit/s
ID-NET™ up to 1 Mbit/s |
| Input 1 |
|---|
| Input type | External triggering |
| Output |
|---|
| Signal output | 2, programmable, optocoupled |
| Switching voltage | max. 40 V DC |
| Switching current | max. 40 mA |
| Voltage drop | 1 V at load current ≤ 10 mA |
| Compliance with standards and directives |
|---|
| Directive conformity | EMC Directive 2004/108/EC |
| Standard conformity | |
| Noise immunity | EN 61000-6-2:2005 |
| Emitted interference | EN 55022 |
| Degree of protection | EN 60529 |
| Laser class | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
| Ambient conditions |
|---|
| Ambient temperature | 0 … 45 °C (32 … 113 °F) |
| Storage temperature | -20 … 70 °C (-4 … 158 °F) |
| Relative humidity | 90 % , noncondensing |
| Shock resistance | IEC 68-2-27 Test EA 30G; 11 ms; 3 impacts on each axis |
| Vibration resistance | IEC 68-2-6 Test FC 1.5 mm ; 10 … 55 Hz ; 2 hours on each axis |
| Mechanical specifications |
|---|
| Degree of protection | IP65 |
| Connection | 1 m cable with 25-pin Sub-D connector |
| Material | |
| Housing | Aluminum |
| Mass | 330 g |
Classifications
| System | Classcode |
|---|
| ECLASS 11.0 | 27280102 |
| ECLASS 10.0.1 | 27280102 |
| ECLASS 9.0 | 27280102 |
| ECLASS 8.0 | 27280102 |
| ECLASS 5.1 | 27280102 |
| ETIM 8.0 | EC002999 |
| ETIM 7.0 | EC002999 |
| ETIM 6.0 | EC002999 |
| UNSPSC 12.1 | 43211701 |
