Description
Datasheet excerpt: Technical data of DoorScan-DS-2P-1200
| Product Description |
|---|
| Light curtain for individual protection for automatic doors in accordance with DIN 18650/EN 16005, complete system for a door measuring up to 1200 mm wide, NPN output |
| General specifications |
|---|
| Detection range min. | 0 … 1500 mm |
| Detection range max. | 0 … 3500 mm (Upright CA test body) |
| Sensing range | 1000 mm at installation height of 2100 mm |
| Light source | IRED 850 nm |
| Black/White difference (6 %/90 %) | < 2 % at 2000 mm sensor range |
| Number of beams | 10 |
| Operating mode | Background evaluation |
| Diameter of the light spot | 8 cm at 2000 mm sensor range |
| Functional safety related parameters |
|---|
| Safety Integrity Level (SIL) | SIL 2 |
| Performance level (PL) | PL d |
| Category | Cat. 2 |
| MTTFd | 112.7 a |
| Mission Time (TM) | 10 a |
| Indicators/operating means |
|---|
| Function indicator | Receiver: Red LED: detection, excess gain, fault code
Interface: Red LED: detection, excess gain, fault code
Yellow LED: teach status
Green LED: blank status
Green LED: DIP switch status |
| Control elements | Teach-In key , DIP-switch for selection of operating modes |
| Electrical specifications |
|---|
| Operating voltage | 24 V DC +/- 20 % |
| No-load supply current | max. 200 mA |
| Power consumption | 4.8 W |
| Input |
|---|
| Test input | high level ≥ 15 V low level ≤ 2 V |
| Control input | Standby active at U = 11 V DC at 30 V DC |
| Output |
|---|
| Switching type | light on |
| Signal output | switchable NPN or PNP , short-circuit protected |
| Switching voltage | max. 30 V DC |
| Switching current | max. 100 mA |
| Response time | ≤ 52 ms
≤ 200 ms in boost operating mode |
| Conformity |
|---|
| Functional safety | ISO 13849-1 ; EN 61508 part1-4 |
| Product standard | EN 12978 |
| Approvals and certificates |
|---|
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
|---|
| Ambient temperature | -30 … 60 °C (-22 … 140 °F) |
| Mechanical specifications |
|---|
| Housing length L | 1200 mm |
| Mounting height | max. 3500 mm |
| Degree of protection | IP54 (iwhen mounted) |
| Connection | Plug-in terminal with 6-wire connection cable |
| Material | |
| Housing | Aluminum / PA |
| Optical face | PC (Polycarbonate) |
| Mass | approx. 2100 g |
| Dimensions | (W x H x D) : 42 mm x 1200 mm x 37 mm |
| General information |
|---|
| Scope of delivery | Sensor system for hinge side and leading edge side (2 emitter and receiver modules each, 1 interface module, connecting cable, 2 housing profiles and optical covers each, 4 end caps) |
Classifications
| System | Classcode |
|---|
| ECLASS 11.0 | 27270913 |
| ECLASS 10.0.1 | 27270913 |
| ECLASS 9.0 | 27270913 |
| ECLASS 8.0 | 27270913 |
| ECLASS 5.1 | 27270903 |
| ETIM 7.0 | EC002550 |
| ETIM 6.0 | EC002550 |
| ETIM 5.0 | EC001821 |
| UNSPSC 12.1 | 39121528 |
