| General specifications |
|---|
| Measurement range | 0.3 … 150 m |
| Reference target | Foil reflector 500 mm x 500 mm |
| Light source | laser diode |
| Laser nominal ratings | |
| Note | VISIBLE AND INVISIBLE LASER RADIATION , DO NOT STARE INTO BEAM |
| Laser class | Measurement laser: 1
Alignment laser: 2 |
| Wave length | Measurement laser: 905 nm
Alignment laser: 660 nm |
| Beam divergence | Measurement laser: 2 mrad
Alignment laser: 1 mrad |
| Pulse length | Measurement laser: 4 ns |
| Repetition rate | Measurement laser: 20 kHz |
| Maximum optical power output | Alignment laser: 0.6 mW |
| max. pulse energy | Measurement laser: 12 nJ |
| Measuring method | Pulse Ranging Technology (PRT) |
| Max. Motion velocity | 15 m/s |
| Alignment aid | Laser pointer |
| Life span | > 100000 h |
| Diameter of the light spot | < 35 cm at 150 m |
| Ambient light limit | > 100000 Lux |
| Resolution | 0.1 mm , adjustable |
| Temperature influence | 0.03 mm/K |
| Functional safety related parameters |
|---|
| MTTFd | 89 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
|---|
| Function indicator | 4 LEDs |
| Control elements | Control panel (4 membrane keys) for setting parameters |
| Parameterization indicator | Illuminated display for displaying measured values and parameterization |
| Electrical specifications |
|---|
| Operating voltage | 18 … 30 V DC |
| No-load supply current | 250 mA (18 V) … 150 mA (30 V) |
| Protection class | III (operating voltage 50 V) |
| Time delay before availability | < 10 s |
| Interface |
|---|
| Interface type | PROFIBUS DP acc. to EN 50170 |
| Transfer rate | 9.6 kbit/s … 12 Mbit/s , adjustable |
| Input/Output |
|---|
| Input/output type | 2 PNP inputs/outputs, independent configuration, short-circuit protected, reverse polarity protected |
| Input |
|---|
| Switching threshold | low: Ue < 6 V,
high: Ue > 16 V |
| Output |
|---|
| Switching threshold | low: Ua < 1 V,
high: Ua > Ub – 1 V |
| Switching current | 200 mA per output |
| Conformity |
|---|
| Product standard | EN 60947-5-2 |
| Laser safety | IEC 60825-1:2007 |
| Measurement accuracy |
|---|
| Measured value output | 1 ms |
| Average data age | 3 ms , 6 ms , 12 ms , 25 ms , 50 ms , adjustable |
| Offset | max. 2 mm (between two devices) |
| Absolute accuracy | ± 2.5 mm (> 3 m); ± 3.5 mm (0.3 m to 3 m) |
| Repeat accuracy | < 0.5 mm |
| Approvals and certificates |
|---|
| UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure |
| FDA approval | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
| Ambient conditions |
|---|
| Ambient temperature | -10 … 50 °C (14 … 122 °F) |
| Storage temperature | -20 … 70 °C (-4 … 158 °F) |
| Relative humidity | 95 % , no moisture condensation |
| Mechanical specifications |
|---|
| Housing width | 140 mm |
| Housing height | 100 mm |
| Degree of protection | IP65 |
| Connection | 4-pin, M12x1 connector, standard (supply) ,
5-pin, M12x1 connector, B-coded (Bus In) ,
5-pin, M12x1 socket, B-coded (Bus Out) ,
8-pin, M12x1 connector, service |
| Material | |
| Housing | ABS / PC |
| Optical face | PMMA , hard coated |
| Mass | approx. 700 g |
