| General specifications |
|---|
| Sensing range | 350 … 6000 mm |
| Adjustment range | 400 … 6000 mm |
| Dead band | 0 … 350 mm |
| Standard target plate | 100 mm x 100 mm |
| Transducer frequency | approx. 80 kHz |
| Response delay | ≤ 275 ms |
| Nominal ratings |
|---|
| Temperature drift | ≤ ± 1.5 % of full-scale value |
| Time delay before availability | ≤ 300 ms |
| Limit data |
|---|
| Permissible cable length | max. 300 m |
| Indicators/operating means |
|---|
| LED yellow | switching state switch output |
| LED green/yellow | yellow: object in evaluation range
green: Teach-In |
| Potentiometer | switching output adjustable |
| Electrical specifications |
|---|
| Rated operating voltage | 24 V DC |
| Operating voltage | 20 … 30 V DC (including ripple) |
| Ripple | ≤ 10 % |
| No-load supply current | ≤ 50 mA |
| Interface |
|---|
| Interface type | Infrared |
| Mode | point-to-point connection |
| Input/Output |
|---|
| Input/output type | 1 synchronization connection, bidirectional ( Factory setting: synchronized mode ) / Teach-In input |
| 0 Level | ≤ 3 V |
| 1 Level | ≥ 15 V |
| Input impedance | typ. 900 Ω |
| Number of sensors | max. 10 |
| Switching output |
|---|
| Output type | 1 switch output PNP, NO ( NC contact programmable ) |
| Default setting | 400 … 6000 mm ( adjustable via potentiometer ) |
| Repeat accuracy | ± 9 mm |
| Operating current | 300 mA , short-circuit/overload protected |
| Switching frequency | ≤ 1 Hz |
| Switching hysteresis | 60 mm ( programmable ) |
| Voltage drop | ≤ 3 V |
| Off-state current | ≤ 10 µA |
| Analog output |
|---|
| Output type | 1 current output 4 … 20 mA , ascending/descending programmable |
| Default setting | rising ramp ; evaluation limit A1: 400 mm ; evaluation limit A2: 6000 mm |
| Load resistor | ≤ 500 Ω |
Compliance with standards and directives |
|---|
| Standard conformity | |
| Standards | EN IEC 60947-5-2:2020
IEC 60947-5-2:2019
EN 60947-5-7:2003
IEC 60947-5-7:2003 |
| Approvals and certificates |
|---|
| UL approval | cULus Listed, Class 2 Power Source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions UCC6000-30GH70-IE2R2-V15 |
|---|
| Ambient temperature | -25 … 70 °C (-13 … 158 °F) |
| Storage temperature | -40 … 85 °C (-40 … 185 °F) |
| Shock resistance | 30 g , 11 ms period |
| Vibration resistance | 10 … 55 Hz , Amplitude ± 1 mm |
| Mechanical specifications |
|---|
| Connection type | Connector plug M12 x 1 , 5-pin |
| Housing diameter | 30 mm |
| Degree of protection | IP65 |
| Material | |
| Housing | Stainless steel 1.4571 / AISI 316Ti plastic PBT |
| Transducer | FEP coated; epoxy resin/hollow glass sphere mixture; polyurethane foam |
| Installation position | any position |
| Mass | 280 g |
| Construction type | Cylindrical |
