| General specifications |
|---|
| Signal type | Analog input |
| Supply |
|---|
| Rated voltage | 12 … 35 V DC loop powered |
| Power dissipation | 0.4 W |
| Input |
|---|
| Connection side | field side |
| Connection | terminals 1, 2-, 3+ suitable for Pt100, 2- and 3-wire connection |
| Lead resistance | max. 100 Ω per line |
| Measuring current | approx. 1 mA |
| Output |
|---|
| Connection side | control side |
| Connection | terminals 9+, 8- |
| Load | (U -12 V) / 0.02 A |
| Current output | 4 … 20 mA , limited to ≤ 35 mA |
| Fault signal | upscaling ≥ 22 mA (limited to 35 mA) |
| Transfer characteristics |
|---|
| Measurement range | span without linearization 25 … 800 °C (77 … 1472 °F)/with linearization 25 … 375 °C (77 … 707 °F), both adjustable
zero point without linearization -200 … 400 °C (-328 … 752 °F)/with linearization -30 … 375 °C (-22 … 707 °F), both adjustable |
| Deviation | |
| After calibration | 0.1 % of full-scale value incl. linearity and hysteresis |
| Influence of ambient temperature | span and zero point 0.015 % / K or ± 10 mΩ / K |
| Influence of supply voltage | 6.5 ppm/V |
| Rise time | 250 ms |
| Galvanic isolation |
|---|
| Input/Output | available |
| Indicators/settings |
|---|
| Control elements | DIP-switch
rotary switch |
| Configuration | via DIP switches
via rotary switch |
| Labeling | space for labeling at the front |
| Directive conformity |
|---|
| Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Conformity |
|---|
| Insulation coordination | EN 50178 |
| Galvanic isolation | EN 50178 |
| Degree of protection | IEC 60529 |
| Ambient conditions |
|---|
| Ambient temperature | -20 … 60 °C (-4 … 140 °F) |
| Mechanical specifications |
|---|
| Degree of protection | IP20 |
| Connection | screw terminals |
| Mass | approx. 150 g |
| Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Data for application in connection with hazardous areas |
|---|
| EU-Type Examination Certificate | ZELM 00 ATEX 0036 |
| Marking |   II (1)GD [EEx ia] IIC |
| Voltage | 16.1 V |
| Current | 33 mA |
| Power | 131 mW |
| Certificate | TÜV 01 ATEX 1777 X |
| Marking | II 3G Ex nA II T4 |
| Galvanic isolation | |
| Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Directive conformity | |
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 |
| International approvals |
|---|
| CSA approval | |
| Control drawing | 116-0132 |
| General information |
|---|
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
