UBE4000-30GM-SA2-V15

Thương hiệu: Pepperl+Fuchs

Mô tả

Thông số kỹ thuật của cảm biến UBE4000-30GM-SA2-V15

General specifications
Sensing range		0 … 4000 mm , distance emitter-receiver 500 mm … 4000 mm
	Through-beam mode	Single path ultrasonic switch
Reference target		receiver
Transducer frequency		85 kHz
Indicators/operating means
LED green		alignment aid OFF: no ultrasonic signal flashing: uncertain area ON: positive reception
LED yellow		switching state
Electrical specifications
Operating voltage		18 … 30 V DC , ripple 10 %_SS
No-load supply current		35 mA emitter 25 mA receiver
Output
Output type		2 switch outputs PNP, normally open/closed (complementary)
Rated operating current		200 mA
Voltage drop		≤ 2.5 V
Switch-on delay		100 … 3000 ms
Switching frequency		≤ 15 Hz
Approvals and certificates
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		0 … 60 °C (32 … 140 °F)
Storage temperature		-40 … 85 °C (-40 … 185 °F)
Mechanical specifications
Connection type		Connector M12 x 1 , 5-pin
Degree of protection		IP65
Material
	Housing	nickel plated brass; plastic components: PBT
Mass		160 g each sensor

Phân loại

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “UBE4000-30GM-SA2-V15”