| General specifications |
|---|
| Switching element function | Analog current or voltage output, programmable
2 switch outputs, programmable |
| Object distance | 0.5 … 3 mm , recommended: 1.5 mm |
| Measurement range | 0 … 40 mm |
| Linearity range | 1 … 39 mm |
| Nominal ratings |
|---|
| Operating voltage | 12 … 30 V DC
(13 … 30 V when analog voltage output is parameterized) |
| Reverse polarity protection | reverse polarity protected |
| Linearity error | within measuring range: ± 0.8 mm
within linearity range: ± 0.4 mm |
| Repeat accuracy | ± 0.1 mm |
| Resolution | 50 µm |
| Temperature drift | ± 0.5 mm (-25 °C … 70 °C) |
| No-load supply current | ≤ 40 mA |
| Operating voltage indicator | LED green |
| Functional safety related parameters |
|---|
| MTTFd | 365 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
|---|
| LED S1 | switching state Switching output 1 |
| LED S2 | switching state Switching output 2 |
| LED S3 | Damping element in the configured analog measuring range |
| LED STATUS | Status display LED, green/red (Power on, communication/error, missing damping element) |
| Interface |
|---|
| Interface type | IO-Link (via C/Q = Pin 4) |
| Device profile | Smart Sensor |
| Device ID | 0x200203 (2097667) |
| Transfer rate | COM 2 (38.4 kBaud) |
| Value range | 0000h … 3200h |
| Min. cycle time | 2.3 ms |
| Process data width | Process data input: 16 Bit
Process data output: none |
| SIO mode support | yes |
| Compatible master port type | A |
| Switching output |
|---|
| Output type | 2 push-pull outputs (can be parameterized), short-circuit-proof, reverse polarity protection, surge-proof |
| Operating current | ≤ 100 mA / output |
| Switching window | ± 1 mm |
| Switching hysteresis | 0.2 mm |
| Voltage drop | ≤ 3 V |
| Short-circuit protection | pulsing |
| Analog output |
|---|
| Output type | 1 current output: 4 … 20 mA or 1 voltage output: 0 … 10 V , programmable |
| Load resistor | current output: ≤ 400 Ω
voltage output: ≥ 1000 Ω |
| Short-circuit protection | voltage output: current limit |
| Compliance with standards and directives |
|---|
| Standard conformity | |
| Standards | EN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
EN 60947-5-7:2003
EN61131-9:2013
IEC 60947-5-7:2003
IEC 61131-9:2013 |
| Approvals and certificates |
|---|
| UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure |
| Marine approval | DNVGL TAA00001V2 |
| Ambient conditions |
|---|
| Ambient temperature | -25 … 85 °C (-13 … 185 °F) |
| Mechanical specifications |
|---|
| Connection type | 5-pin, M12 x 1 connector |
| Degree of protection | IP67 / IP69K |
| Material | |
| Housing | PBT, stainless steel 1.4571 , brass, nickel-plated |
| Target | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) |
| Mass | 56 g |
