| General specifications |
|---|
| Signal type | Analog input |
| Supply |
|---|
| Connection | Power Rail or terminals 44+, 45- |
| Rated voltage | 20 … 30 V DC |
| Ripple | ≤ 10 % |
| Rated current | ≤ 50 mA |
| Input |
|---|
| Connection side | field side |
| Connection | intrinsically safe: terminals 1 … 16
non-intrinsically safe: terminals 28, 29 |
| Ground connection | terminal 17 |
| Rated values | 5 Vpp, 0.1 mA; rectangular |
| Function | Test input: 24 V DC / 5 mA; non-polarized |
| Output |
|---|
| Connection side | control side |
| Connection | terminals 19, 20, 21 |
| Output | signal ; relay |
| Contact loading | 253 V AC/2 A /cos φ > 0.7; 40 V DC/2 A resistive load; |
| Mechanical life | 107 switching cycles |
| Transfer characteristics |
|---|
| Response delay | ≤ 50 s |
| Galvanic isolation |
|---|
| Input/Output | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Input/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Output/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Indicators/settings |
|---|
| Display elements | LEDs |
| Control elements | DIP-switch |
| Configuration | via DIP switches |
| Labeling | space for labeling at the front |
| Directive conformity |
|---|
| Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Low voltage | |
| Directive 2014/35/EU | EN 61010-1:2010 |
| Conformity |
|---|
| Electromagnetic compatibility | NE 21:2007 |
| Degree of protection | IEC 60529:2001 |
| Ambient conditions |
|---|
| Ambient temperature | -20 … 60 °C (-4 … 140 °F) |
| Mechanical specifications |
|---|
| Degree of protection | IP20 |
| Connection | screw terminals |
| Mass | approx. 260 g |
| Dimensions | 60 x 119 x 115 mm (2.4 x 4.7 x 4.5 inch) , housing type D2 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Data for application in connection with hazardous areas |
|---|
| EU-type examination certificate | TÜV 00 ATEX 1585 |
| Marking |   II (1)G [Ex ia Ga] IIC
II (1) D [Ex ia Da] IIIC
I (M1) [Ex ia Ma] I |
| Voltage | 7.2 V |
| Current | 1.7 mA |
| Power | 3 mW |
| Supply | |
| Maximum safe voltage | 40 V DC (Attention! The rated voltage can be lower.) |
| Collective error message | |
| Maximum safe voltage | 40 V (Attention! The rated voltage can be lower.) |
| Galvanic isolation | |
| Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Input/power supply | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Directive conformity | |
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 |
| General information |
|---|
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
