Mô tả
Bảng thông số kỹ thuật của ENI11HD-H
| General specifications |
|---|
| Detection type | photoelectric sampling |
| Pulse count | max. 2500 |
| Functional safety related parameters |
|---|
| MTTFd | 140 a |
| Mission Time (TM) | 20 a |
| L10 | 50 E+9 at 1750 rpm |
| Diagnostic Coverage (DC) | 0 % |
| Electrical specifications |
|---|
| Operating voltage | 10 … 30 V DC or 5 V DC ± 5 % (see “Output circuit” in the ordering information) |
| No-load supply current | max. 70 mA |
| Output |
|---|
| Output type | push-pull, incremental or RS 422, incremental
(see “Output circuit” in the ordering information) |
| Voltage drop | < 2.5 V (push-pull, incremental) |
| Load current | max. per channel 40 mA , short-circuit protected, reverse polarity protected (push-pull, incremental)
max. per channel 20 mA , short-circuit protected, reverse polarity protected (RS 422, incremental) |
| Output frequency | max. 200 kHz |
| Rise time | 600 ns |
| De-energized delay | 600 ns |
| Connection |
|---|
| Connector | M23 connector, 12-pin , clockwise rotation
M23 connector, 12-pin , counter clockwise rotation |
| Cable | ∅7,5 mm, 6 x 2 x 0,14 mm2 |
| Terminal compartment | Cable duct for cable diameter ∅4 mm … 13 mm |
| Standard conformity |
|---|
| Degree of protection | DIN EN 60529, IP66, IP67 or IP69K |
| Climatic testing | DIN EN 60068-2-78 , no moisture condensation |
| Emitted interference | EN 61000-6-4:2007/A1:2011 |
| Noise immunity | EN 61000-6-2:2005 |
| Shock resistance | DIN EN 60068-2-27, 200 g, 6 ms |
| Vibration resistance | DIN EN 60068-2-6, 20 g, 10 … 2000 Hz |
| Ambient conditions |
|---|
| Operating temperature | -40 … 80 °C (-40 … 176 °F) fixed cable |
| Storage temperature | -40 … 80 °C (-40 … 176 °F) |
| Mechanical specifications |
|---|
| Material | |
| Housing | 3.2315 aluminum |
| Flange | 3.2315 aluminum |
| Shaft | Stainless steel 1.4305 / AISI 303 |
| Mass | approx. 2200 g |
| Rotational speed | max. 3000 min -1 |
| Starting torque | ≤ 20 Ncm |
| Shaft insulation | max. 2.5 kV (for dielectric strength version) |
| Shaft load | |
| Axial | ≤ 300 N |
| Radial | ≤ 400 N |
| Angle offset | 1 ° |
| Axial offset | max. 1 mm |
Phân loại
| System | Classcode |
|---|
| ECLASS 11.0 | 27270501 |
| ECLASS 10.0.1 | 27270501 |
| ECLASS 9.0 | 27270501 |
| ECLASS 8.0 | 27270501 |
| ECLASS 5.1 | 27270501 |
| ETIM 8.0 | EC001486 |
| ETIM 7.0 | EC001486 |
| ETIM 6.0 | EC001486 |
| ETIM 5.0 | EC001486 |
| UNSPSC 12.1 | 39121527 |
