Mô tả
Pancake like diaphragm load cell designed for the use in Fully electric Injection Molding Machines.
The Flat-Body design allows for easy integration into the injection unit without adding to the machine length.
TECHNICAL DATA OF DLCA
| OUTPUT SIGNAL | VOLTAGE | CURRENT |
| Measuring range | 60…650kN |
| Sampling rate | 5 kHz |
| Low-pass filter | 1 kHz |
| Zero output signal | 0 V (V) | 4 mA (I) |
| Full scale output signal | +10 V (V) compression | 20 mA (I) compression |
| -10 V (V) stretching | – |
| Accuracy | <±1% FS |
| Accuracy of zero point | <±0,1% FS |
| Linearity | <±0,6% FS |
| Hysteresis | <±0,6% FS |
| Repeatability | <±0,2% FS |
| Allowed load | ≥ 5 kΩ | 0…500 Ω |
| Repeatability | >25 ms |
| Reset voltage | 12…36VDC, 0 VDC |
| Supply voltage | 12…36VDC |
| Power consumption | 0.5 W | 1 W |
| Inverse polarity protection | Yes |
| Accidental short-circuit protection | Yes |
| Dielectric strenght (1) | 50V |
| Operating temperature range | 0…70°C |
| Storage temperatur range | 0…70°C |
| Temperature effects (zero) | ± 0,02 % FS/°C |
| Temperature effects (span) | ± 0,02 % FS/°C |
| Maximum applicable load | 150% |
| Rupture load | >200% |
| Protection class | IP54 |
| EC Conformity | According to Directive 2014/30/EU |
| Case material | Steel |
(1) Uses 50V 2J Voltage suppressor
