| General specifications |
|---|
| Effective detection range | 0 … 3.5 m in TEACH mode ; 0 … 5 m at switch position “N” |
| Reflector distance | 0 … 3.5 m in TEACH mode ; 0 … 5 m at switch position “N” |
| Threshold detection range | 6 m |
| Reference target | H85-2 reflector |
| Light source | LED |
| Light type | modulated visible red light |
| LED risk group labelling | exempt group |
| Diameter of the light spot | approx. 170 mm at a distance of 3.5 m |
| Angle of divergence | approx. 5 ° |
| Ambient light limit | EN 60947-5-2 |
| Functional safety related parameters |
|---|
| MTTFd | 600 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
|---|
| Operation indicator | LED green:
constantly on – power on
flashing (4Hz) – short circuit
flashing with short break (1 Hz) – IO-Link mode |
| Function indicator | Yellow LED:
Permanently lit – light path clear
Permanently off – object detected
Flashing (4 Hz) – insufficient operating reserve |
| Control elements | Teach-In key |
| Control elements | 5-step rotary switch for operating modes selection |
| Contrast detection levels | 10 % – clean, water filled PET bottles
18 % – clear glass bottles
40 % – colored glass or opaque materials
Adjustable via rotary switch |
| Electrical specifications |
|---|
| Operating voltage | 10 … 30 V DC |
| Ripple | max. 10 % |
| No-load supply current | < 25 mA at 24 V supply voltage |
| Protection class | III |
| Interface |
|---|
| Interface type | IO-Link ( via C/Q = pin 4 ) |
| Transfer rate | COM 2 (38.4 kBaud) |
| IO-Link Revision | 1.1 |
| Min. cycle time | 2.3 ms |
| Process data width | Process data input 2 Bit
Process data output 2 Bit |
| SIO mode support | yes |
| Device ID | 0x110A01 (1116673) |
| Compatible master port type | A |
| Output |
|---|
| Switching type | The switching type of the sensor is adjustable. The default setting is:
C/Q – Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link
/Q – Pin2: NPN normally closed / light-on, PNP normally open / dark-on |
| Signal output | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
| Switching voltage | max. 30 V DC |
| Switching current | max. 100 mA , resistive load |
| Usage category | DC-12 and DC-13 |
| Voltage drop | ≤ 1.5 V DC |
| Switching frequency | 500 Hz |
| Response time | 1 ms |
| Conformity |
|---|
| Communication interface | IEC 61131-9 |
| Product standard | EN 60947-5-2 |
| Approvals and certificates |
|---|
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Ambient conditions |
|---|
| Ambient temperature | -20 … 60 °C (-4 … 140 °F) |
| Storage temperature | -40 … 70 °C (-40 … 158 °F) |
| Mechanical specifications |
|---|
| Housing width | 13.9 mm |
| Housing height | 41.4 mm |
| Housing depth | 18.3 mm |
| Degree of protection | IP67 / IP69 / IP69K |
| Connection | M8 x 1 connector, 4-pin |
| Material | |
| Housing | PC (Polycarbonate) |
| Optical face | PMMA |
| Mass | approx. 10 g |
