Description
Datasheet excerpt: Technical data of MLV41-8-HV-60-IR-5360
| Product Description |
|---|
| Background suppression sensor |
| General specifications |
|---|
| Foreground suppression | 0 … 15 mm |
| Detection range | on black (6 %): 20 … 60 mm fixed |
| Detection range min. | 20 … 60 mm |
| Detection range max. | 16 … 70 mm |
| Background suppression | starts from 70 mm |
| Light source | IRED |
| Light type | modulated infrared light , 880 nm |
| Polarization filter | no |
| Black/White difference (6 %/90 %) | < 1 % at 60 mm |
| Diameter of the light spot | max. 6 mm at a distance of 70 mm |
| Angle of divergence | approx. 4 ° |
| Ambient light limit | 50000 Lux |
| Functional safety related parameters |
|---|
| MTTFd | 1260 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
|---|
| Operation indicator | LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) |
| Function indicator | 2 LEDs yellow
ON: object inside the scanning range
OFF: object outside the scanning range |
| Electrical specifications |
|---|
| Operating voltage | 10 … 30 V DC |
| Ripple | 10 % |
| No-load supply current | max. 25 mA |
| Input |
|---|
| Control input | – When the input is open: Sensor operates
– the output is reset on a positive edge
– the output is set at high level when an object is located in the detection range
– there is no sensor function at low level, the output signal is stored until the next positive edge |
| Output |
|---|
| Signal output | 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected |
| Switching voltage | max. 30 V DC |
| Switching current | max. 100 mA |
| Voltage drop | ≤ 2.5 V DC |
| Switching frequency | 250 Hz |
| Response time | 2 ms |
| Conformity |
|---|
| Product standard | EN 60947-5-2 |
| Approvals and certificates |
|---|
| UL approval | cULus Listed 57M3 (Only in association with UL Class 2 power supply; Type 1 enclosure) |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
|---|
| Ambient temperature | 0 … 70 °C (32 … 158 °F) |
| Storage temperature | -40 … 75 °C (-40 … 167 °F) |
| Mechanical specifications |
|---|
| Housing width | 31 mm |
| Housing height | 56.5 mm |
| Housing depth | 13.6 mm |
| Degree of protection | IP67 |
| Connection | M8 x 1 connector, 4-pin |
| Material | |
| Housing | Aluminum , Delta-Seal coated |
| Optical face | glass pane |
| Connector | metal |
| Mass | 50 g |
Classifications
| System | Classcode |
|---|
| ECLASS 11.0 | 27270903 |
| ECLASS 10.0.1 | 27270903 |
| ECLASS 9.0 | 27270903 |
| ECLASS 8.0 | 27270903 |
| ECLASS 5.1 | 27270903 |
| ETIM 8.0 | EC001821 |
| ETIM 7.0 | EC001821 |
| ETIM 6.0 | EC001821 |
| ETIM 5.0 | EC001821 |
| UNSPSC 12.1 | 39121528 |
