Description
TECHNICAL DATA OF KFD0-CC-Ex1
| General specifications |
|---|
| Signal type | Analog input |
| Supply |
|---|
| Rated voltage | 12 … 35 V DC loop powered |
| Power dissipation | 0.4 W |
| Input |
|---|
| Connection side | field side |
| Connection | terminals 1+, 2- |
| Current range | 0 … 20 mA , load ≤ 50 Ω |
| Voltage range | 0 … 10 V , load ≥ 100 kΩ |
| Output |
|---|
| Connection side | control side |
| Connection | terminals 9+, 8- |
| Load | (U -12 V) / 0.02 A |
| Current output | 4 … 20 mA , limited to ≤ 35 mA |
| Fault signal | downscaling ≤ 3 mA |
| Transfer characteristics |
|---|
| Deviation | |
| After calibration | 0.1 % of full-scale value |
| Temperature effect | span: 0.050 % of span /K ; zero point: 0.060 % of span /K |
| Linearization | ≤ 0.04 % of full-scale value |
| Influence of supply voltage | 6.5 ppm/V |
| Rise time | 250 ms |
| Galvanic isolation |
|---|
| Input/Output | safe isolation according to EN 50178, rated insulation voltage 253 Veff |
| Indicators/settings |
|---|
| Control elements | DIP-switch
potentiometer |
| Configuration | via DIP switches
via potentiometer |
| Labeling | space for labeling at the front |
| Directive conformity |
|---|
| Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Conformity |
|---|
| Galvanic isolation | EN 50178:1997 |
| Degree of protection | IEC 60529:2001 |
| Ambient conditions |
|---|
| Ambient temperature | -20 … 60 °C (-4 … 140 °F) |
| Mechanical specifications |
|---|
| Degree of protection | IP20 |
| Connection | screw terminals |
| Mass | approx. 100 g |
| Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Data for application in connection with hazardous areas |
|---|
| EU-Type Examination Certificate | ZELM 00 ATEX 0034 |
| Marking |   II (1)GD [EEx ia] IIC |
| Input | EEx ia IIC |
| Voltage | 9.6 V |
| Current | 0.5 mA |
| Power | 1.1 mW linear characteristic |
| Output | |
| Maximum safe voltage | 60 V (Attention! The rated voltage can be lower.) |
| Certificate | TÜV 01 ATEX 1777 X |
| Marking | II 3G Ex nA II T4 |
| Galvanic isolation | |
| Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Directive conformity | |
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 |
| International approvals |
|---|
| CSA approval | |
| Control drawing | 116-0132 |
| General information |
|---|
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Classifications
| System | Classcode |
|---|
| ECLASS 11.0 | 27210107 |
| ECLASS 10.0.1 | 27210107 |
| ECLASS 9.0 | 27210107 |
| ECLASS 8.0 | 27210107 |
| ECLASS 5.1 | 27210107 |
| ETIM 8.0 | EC002475 |
| ETIM 7.0 | EC002475 |
| ETIM 6.0 | EC002475 |
| ETIM 5.0 | EC001485 |
| UNSPSC 12.1 | 32101514 |
