Description
TECHNICAL DATA OF eView BOX
The eView BOX internal cabinet control panel lets you display, set, and manage all of the machine or system automa- tion data. The use of an Intel ATOM low-consumption processor, plus an extremely efficient design (no fans or moving parts), eliminates all maintenance. The processor can run at either 1 GHz or 1.3 GHz.
The controller has several communication ports (USB, Ethernet, RS232, RS485 and CAN) and different protocols (Ethercat (Master), GDNET (Master), Modbus TCP/IP (Master\Slave), CANopen (Master), Modbus RTU (Master/Slave)). The 2 GB internal mass memory can be expanded with SD cards.
Programming is done with a single development tool: GF_Project VX, which ensures complete and fast management of application software by means of the five standard IEC61131-3 languages and a powerful graphic editor.
In combination with I/Os, eView BOX completes the management and control of process and automation. It manages sequences and work processes, and sets and displays data and connectivity.
In addition, there is a series of specific application templates, user-friendly and easily customizable, for the plastics and heat treatment industries.
| eView BOX |
| POWER SUPPLY | Operating voltage | 24 VDC ±25% |
| Current draw (at 24 VDC) | 500 mA max |
| Power dissipation | 12 W max |
| Protections | Polarity inversion Short circuit |
| Connection | 3-pin polarized removable connector Screw terminals, max cable section 2.5 mm2 |
| CONNECTIONS | Ethernet port (ETH) | Number of channels: 2 max (1 optional) Connector: RJ45 Velocity: 10 / 100 / 1000 Mbit/s Signals: green connection LED, yellow data LED |
| KEY & LED port | Connector: RJ45 Standard: USB2.0 |
| RS-232 port (optional) | Connector: DB9 M Speed: 1.2kbit/s…115kbit/s |
| RS-485 port (optional) | Optically isolated Connector: DB9 M Speed: 9 kbit/s … 19 kbit/s Terminations and polarization: internal, selectable with jumper |
| CAN port (optional) | Optically isolated Connector: DB9 M Speed: 20, 50, 100, 125, 250, 500, 1000 kbit/s, default 500 kbit/s Termination: internal, selectable with jumper |
| USB port | Number of ports: 2 max Connector: type A Standard: USB 2.0 Protection: overload |
| COMMUNICATION PROTOCOLS | Ethernet | FTP (File Transfer Protocol) Modbus TCP/IP Master/Slave Ethercat Master GDNET Master |
| CAN | CANopen Master |
| Modbus | Modbus RTU Master/Slave |
| CONFIGURATION ELEMENTS | Access to software procedures | 16-position rotary switch |
| Touch screen calibration | Via software on product |
| CONTROL ELEMENTS | Touch screen | 4-wire resistive technology |
| VIEWING ELEMENTS | Diagnostics | PW LED (yellow): power supply on RN LED (green): PLC program state LED E1 (red): HW Watchdog state LED E2 (red): PLC program error |
| MICROPROCESSOR | Type and frequency | ATOM E640 1 GHz ATOM E660, 1.3 GHz |
| MEMORY | System | 512 MB, DRAM type DDR II |
| Mass | 2 GB Flash memory |
| Mass extension | SD Card Slot * |
| eView BOX |
| AMBIENT CONDITIONS | Operating temperature | 0 … +55 °C (as per IEC 68-2-14) |
| Storage temperature | -20 … +70 °C (as per IEC 68-2-14) |
| Relative humidity | max 95% RH non condensing (as per IEC 68-2-3) |
| Vibrations | 5 to 9 Hz: sine constant 3.5 mm 10 to 150 Hz: sine acceleration 1G |
| ASSEMBLY | | Mounting inside the control panel, horizontally with the DIN bar or vertically with fixing screws. |
| PROTECTION LEVEL | | IP 20 (as per IEC 68-2-3) |
| WEIGHT | | 1,250 kg |
| CE STANDARDS | EMC (electromagnetic compatibility) | Conforms to Directive 2014/30/EU EN61131-2: Programmable controllers Part 2: Equipment requirements and tests. |
* SD card not supplied. Available as accessory
