| General specifications |
|---|
| Detection type | magnetic sampling |
| Device type | Absolut rotary encoder as Pure Line |
| Linearity error | ≤ ± 0.1 ° |
| UL File Number | E223176 “For use in NFPA 79 Applications only” , if UL marking is marked on the product. |
| Functional safety related parameters |
|---|
| MTTFd | 566 a at 40 °C |
| Mission Time (TM) | 20 a |
| L10 | 1035 E+8 revolutions at 19/44 N axial/radial shaft load |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
|---|
| LED STATUS | LED green
flashing with short break (1 Hz) – IO-Link mode |
| Electrical specifications |
|---|
| Operating voltage | 18 … 30 V DC |
| No-load supply current | max. 50 mA |
| Power consumption | approx. 1.5 W |
| Time delay before availability | < 1 s |
| Interface |
|---|
| Interface type | IO-Link |
| IO-Link Revision | 1.1 |
| Device profile | Identification & Diagnosis – I&D |
| Resolution | |
| Single turn | up to 16 Bit programmable |
| Multiturn | up to 15 Bit programmable |
| Overall resolution | up to 31 Bit programmable |
| Process data | Input 12 Byte
– measurement value 4 Byte
– resolution 16 Bit
– auxiliary mesurement value 4 Byte
– switching signals 2 Bit
– diagnosis signals 2 Bit
– status data |
| Vendor ID | 1 (0x0001) |
| Device ID | 5243649 (0x500301), 5243650 (0x500302) |
| Transfer rate | COM 3 (230.4 kBaud) |
| Min. cycle time | 1.5 ms |
| SIO mode support | no |
| Compatible master port type | Class A
Class B (use 3-pole adapter or 3-wire cable) |
| Connection |
|---|
| Connector | M12 connector, 5 pin , A-coded |
| Standard conformity |
|---|
| Degree of protection | DIN EN 60529, IP65, IP67 |
| Communication interface | IEC 61131-9 / IO-Link V1.1.2 |
| Climatic testing | DIN EN 60068-2-78, no moisture condensation |
| Emitted interference | EN 61000-6-4:2007 |
| Noise immunity | EN 61000-6-2:2005 |
| Shock resistance | DIN EN 60068-2-27, 100 g, 6 ms |
| Vibration resistance | DIN EN 60068-2-6, 10 g, 10 … 1000 Hz |
| Approvals and certificates |
|---|
| UL approval | cULus Listed, General Purpose, Class 2 Power Source , if UL marking is marked on the product. |
| Ambient conditions |
|---|
| Operating temperature | -40 … 85 °C (-40 … 185 °F) |
| Storage temperature | -40 … 85 °C (-40 … 185 °F) |
| Relative humidity | 98 % , no moisture condensation |
| Mechanical specifications |
|---|
| Material | |
| Housing | Zinc plated steel, painted |
| Flange | Aluminum |
| Shaft | Stainless steel |
| Mass | approx. 190 g |
| Rotational speed | max. 12000 min -1 |
| Moment of inertia | < 18 gcm2 |
| Starting torque | < 3 Ncm |
| Shaft load | |
| Axial | 19 N |
| Radial | 44 N |
| Axial offset | ± 0.3 mm static; ± 0,1 mm dynamic |
| Radial offset | ± 0.5 mm static; ± 0,2 mm dynamic |
