| General specifications |
|---|
| Switching function | Normally open (NO) |
| Output type | NAMUR |
| Rated operating distance | 10 mm |
| Installation | flush |
| Output type | 2-wire |
| Nominal ratings |
|---|
| Installation conditions | |
| A | 0 mm |
| B | 0 mm |
| C | 20 mm |
| F | 60 mm |
| Nominal voltage | 8.2 V (Ri approx. 1 kΩ) |
| Operating voltage | 5 … 15 V |
| Switching frequency | 0 … 50 Hz |
| Reverse polarity protection | reverse polarity protected |
| Current consumption | |
| Measuring plate not detected | ≤ 1.5 mA |
| Measuring plate detected | ≥ 2.5 mA |
| Switching state indicator | LED, yellow |
| Functional safety related parameters |
|---|
| MTTFd | 1134 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Compliance with standards and directives |
|---|
| Standard conformity | |
| NAMUR | EN 60947-5-6:2000
IEC 60947-5-6:1999 |
| Standards | EN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012 |
| Approvals and certificates |
|---|
| ATEX approval | |
| Equipment protection level Ga | BVS 13 ATEX E 074 X |
| Equipment protection level Da | BVS 13 ATEX E 074 X |
| ETL approval | cETLus |
| Ambient conditions |
|---|
| Ambient temperature | -20 … 70 °C (-4 … 158 °F) |
| Mechanical specifications |
|---|
| Connection type | Connector plug M12 x 1 , 4-pin |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Sensing face | PTFE |
| Degree of protection | IP67 |
| General information |
|---|
| Use in the hazardous area | see instruction manuals |
