Description
The AM force transducers series have been designed to mea- sure static and dynamic compression forces.
They are particularly suitable for monitoring pounding opera- tions in compression which require a rugged transducer, insensitive to high resonance frequencies caused by non- homogeneous leads in dynamic sequences.
The accuracy and the stability are not affected by continuous cycling under harsh conditions even with dynamic loads.
The small size of the AM force transducers makes them ideal for retrofitting in existing equipment.
TECHNICAL DATA OF AM
| TECHNICAL DATA |
| Accuracy | 1% |
| Nominal full scale load (Ln) | 5…20 kN |
| Nominal output at FSO | 2mV/V |
| Output tolerance at Ln | <± 5% FSO |
| Combined errors: Non linearity Histeresis, Repeatibility | < ± 1% FSO |
| Creep (after 30 min. at Ln) | < ± 0,2% FSO |
| Zero load out of balance signal | < ± 1% FSO |
| Thermal drift in Sensitivity compensated Zero range Calibration | < ± 0,02% FSO°C < ± 0,04% FSO°C – |
| Nominal bridge resistance | 350 Ohm |
| Isolation resistance | > 10 GOhm |
| Nominal supply voltage | 10 V |
| Maximum supply voltage | 15 V |
| Compensated temperature range | -20…+50°C |
| Maximum temperature range | -20…+60°C |
| Storage temperature range | -30…+80°C |
| Permitted static load | 130% Ln |
| Permitted dynamic load | 100% Ln |
| Maximum applicable load | 150% Ln |
| Rupture load | > 300% Ln |
| Maximum static lateral load | 40% Ln |
| Maximum elastic deformation at Ln | < 0,2 mm |
| Grade of protection (DIN40050) | IP65 |
| Electr. connections screened cable | 4×0,15 / 2 m. |
| Elastic element material | Stainless steel |
