Description
Datasheet excerpt: Technical data of UGB-18GM50-255-2E3-150MM-V15-Y
| General specifications |
|---|
| Sensing range | 20 … 60 mm , optimal distance: 45 mm |
| Transducer frequency | 255 kHz |
| Indicators/operating means |
|---|
| LED green | Display: readiness |
| LED yellow | Display: splice detected |
| LED red | Indication: No sheet detected (Air) |
| Electrical specifications |
|---|
| Operating voltage | 18 … 30 V DC , ripple 10 %SS |
| No-load supply current | < 60 mA |
| Input |
|---|
| Input type | Teach-In input
0-level: -UB … -UB + 1V
1-level: +UB – 1 V … +UB |
| Pulse length | ≥ 500 ms |
| Impedance | ≥ 10 kΩ |
| Output |
|---|
| Output type | 2 switch outputs PNP, NC |
| Rated operating current | 2 x 100 mA , short-circuit/overload protected |
| Voltage drop | ≤ 3 V |
| Switch-on delay | ≤ 600 µs |
| Switch-off delay | ≤ 600 µs |
| Pulse extension | ≥ 120 ms programmable |
| Approvals and certificates |
|---|
| UL approval | cULus Listed, General Purpose |
| CSA approval | cCSAus Listed, General Purpose |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
|---|
| Ambient temperature | 0 … 60 °C (32 … 140 °F) |
| Storage temperature | -40 … 70 °C (-40 … 158 °F) |
| Mechanical specifications |
|---|
| Connection type | Cable connector M12 x 1 , 5-pin with PVC Cable, 150 mm |
| Degree of protection | IP67 |
| Material | |
| Housing | nickel plated brass; plastic components: PBT |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| Mass | 150 g |
Classifications
| System | Classcode |
|---|
| ECLASS 11.0 | 27272801 |
| ECLASS 10.0.1 | 27272801 |
| ECLASS 9.0 | 27272801 |
| ECLASS 8.0 | 27272801 |
| ECLASS 5.1 | 27272801 |
| ETIM 8.0 | EC001847 |
| ETIM 7.0 | EC001847 |
| ETIM 6.0 | EC001847 |
| ETIM 5.0 | EC001847 |
