Description
Datasheet excerpt: Technical data of UB6000-30GM-E5-V15
| Product Description |
|---|
| Single head system |
| General specifications |
|---|
| Sensing range | 350 … 6000 mm |
| Adjustment range | 400 … 6000 mm |
| Dead band | 0 … 350 mm |
| Standard target plate | 100 mm x 100 mm |
| Transducer frequency | approx. 65 kHz |
| Response delay | approx. 650 ms |
| Indicators/operating means |
|---|
| LED green | solid: Power-on
flashing: program function object detected |
| LED yellow | solid: switching state switch output
flashing: program function |
| LED red | normal operation: “fault”
program function: no object detected |
| Electrical specifications |
|---|
| Operating voltage | 10 … 30 V DC , ripple 10 %SS |
| No-load supply current | ≤ 50 mA |
| Input/Output |
|---|
| Synchronization | bi-directional
0 level -UB…+1 V
1 level: +4 V…+UB
input impedance: > 12 KOhm
synchronization pulse: ≥ 100 µs, synchronization interpulse period: ≥ 2 ms |
| Synchronization frequency | |
| Common mode operation | max. 7 Hz |
| Multiplex operation | ≤ 7 Hz / n , n = number of sensors , n ≤ 5 |
| Input |
|---|
| Input type | 1 program input,
operating range 1: -UB … +1 V, operating range 2: +4 V … +UB
input impedance: > 4.7 kΩ; program pulse: ≥ 1 s |
| Output |
|---|
| Output type | 1 switch output PNP , Normally open/closed , programmable |
| Rated operating current | 200 mA , short-circuit/overload protected |
| Voltage drop | ≤ 2.5 V |
| Repeat accuracy | ≤ 0.5 % of switching point |
| Switching frequency | ≤ 0.8 Hz |
| Range hysteresis | 1 % of the set operating distance |
| Temperature influence | < 2 % of far switch point |
| Approvals and certificates |
|---|
| UL approval | cULus Listed, General Purpose |
| CSA approval | cCSAus Listed, General Purpose |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
|---|
| Ambient temperature | -25 … 70 °C (-13 … 158 °F) |
| Storage temperature | -40 … 85 °C (-40 … 185 °F) |
| Mechanical specifications |
|---|
| Connection type | Connector M12 x 1 , 5-pin |
| Degree of protection | IP65 |
| Material | |
| Housing | nickel plated brass; plastic components: PBT |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| Mass | 250 g |
Classifications
| System | Classcode |
|---|
| ECLASS 11.0 | 27272803 |
| ECLASS 10.0.1 | 27272803 |
| ECLASS 9.0 | 27272803 |
| ECLASS 8.0 | 27272803 |
| ECLASS 5.1 | 27272803 |
| ETIM 8.0 | EC001849 |
| ETIM 7.0 | EC001849 |
| ETIM 6.0 | EC001849 |
| ETIM 5.0 | EC001849 |
