Description
Datasheet excerpt: Technical data of UB2000-F54-E5-V15
| Product Description |
|---|
| Single head system |
| General specifications |
|---|
| Sensing range | 80 … 2000 mm |
| Adjustment range | 100 … 2000 mm |
| Dead band | 0 … 80 mm |
| Standard target plate | 100 mm x 100 mm |
| Transducer frequency | approx. 175 kHz |
| Response delay | ≤ 150 ms |
| Indicators/operating means |
|---|
| LED green | solid green: monitoring system
green flashing: program function |
| LED yellow | indication of the switching state
flashing: program function object detected |
| LED red | flashing:
normal mode: error
Program function: no object detected
permanently:
Program mode, object uncertain |
| Electrical specifications |
|---|
| Operating voltage | 10 … 30 V DC , ripple 10 %SS |
| No-load supply current | ≤ 55 mA |
| Input/Output |
|---|
| Synchronization | 1 synchronous input
0-level: -UB…+1 V
1-level: +4 V…+UB
input impedance: > 12 KOhm
synchronization pulse: 0,1 … 28 ms |
| Synchronization frequency | |
| Common mode operation | max. 33 Hz |
| Multiplex operation | ≤ 33 / n Hz, n = number of sensors |
| Input |
|---|
| Input type | 1 program input,
switching point A1: -UB … +1 V, switching point A2: +4 V … +UB
input impedance: > 4.7 kΩ, program pulse: ≥ 1 s |
| Output |
|---|
| Output type | 1 switch output E5, PNP, NO/NC |
| Rated operating current | 200 mA , short-circuit/overload protected |
| Voltage drop | ≤ 3 V |
| Repeat accuracy | ≤ 1 % of full-scale value |
| Switching frequency | max. 3 Hz |
| Range hysteresis | ≤ 1 % of the set operating distance |
| Temperature influence | ± 1.5 % of full-scale value |
| Approvals and certificates |
|---|
| UL approval | cULus Listed, General Purpose |
| CSA approval | cCSAus Listed, General Purpose |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
|---|
| Ambient temperature | -25 … 70 °C (-13 … 158 °F) |
| Storage temperature | -40 … 85 °C (-40 … 185 °F) |
| Mechanical specifications |
|---|
| Connection type | Connector M12 x 1 , 5-pin |
| Degree of protection | IP65 |
| Material | |
| Housing | ABS |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| Mass | 100 g |
Classifications
| System | Classcode |
|---|
| ECLASS 11.0 | 27272803 |
| ECLASS 10.0.1 | 27272803 |
| ECLASS 9.0 | 27272803 |
| ECLASS 8.0 | 27272803 |
| ECLASS 5.1 | 27272803 |
| ETIM 8.0 | EC001849 |
| ETIM 7.0 | EC001849 |
| ETIM 6.0 | EC001849 |
| ETIM 5.0 | EC001849 |
