Description
Datasheet excerpt: Technical data of VDM18-100/32/105/122
| Product Description |
|---|
| Universal distance sensor, measurement to object, 100 mm detection range, red laser light, laser class 2, PNP output, analog output, control input, M12 plug |
| General specifications |
|---|
| Measurement range | 30 … 100 mm |
| Light source | laser diode
typ. service life 50,000 h at Ta = +40 °C |
| Light type | modulated visible red light |
| Laser nominal ratings | |
| Laser class | 2 |
| Wave length | 650 nm |
| Light spot representation | approx. 1.5 mm x 3.25 mm at 100 mm |
| Measuring method | Laser triangulation |
| Resolution | < 0.1 % of the measuring range |
| Indicators/operating means |
|---|
| Function indicator | 2 yellow LEDs: Switching status (each output) , 4 green LEDs: Operating mode |
| Control elements | Control panel : Adjuster for switch point , Operating mode , Analog output ( S – Set , T – Toggle ) |
| Electrical specifications |
|---|
| Operating voltage | 18 … 30 V DC |
| Output |
|---|
| Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector |
| Compliance with standards and directives |
|---|
| Directive conformity | |
| EMC Directive 2004/108/EC | EN 60947-5-2 |
| Standard conformity | |
| Laser class | DIN EN 60825-1:2008, IEC 60825-1:2007 |
| Approvals and certificates |
|---|
| Approvals | CE, cULus |
| Mechanical specifications |
|---|
| Degree of protection | IP67 |
| Connection | 5-pin, M12 x 1 plastic connector |
| Material | |
| Housing | ABS , impact resistant |
| Optical face | PMMA |
Classifications
| System | Classcode |
|---|
| ECLASS 11.0 | 27270801 |
| ECLASS 10.0.1 | 27270801 |
| ECLASS 9.0 | 27270801 |
| ECLASS 8.0 | 27270801 |
| ECLASS 5.1 | 27270801 |
| ETIM 8.0 | EC001825 |
| ETIM 7.0 | EC001825 |
| ETIM 6.0 | EC001825 |
| ETIM 5.0 | EC001825 |
