| General specifications |
|---|
| Switching function | complementary |
| Output type | NPN |
| Rated operating distance | 40 mm |
| Installation | non-flush |
| Output polarity | DC |
| Assured operating distance | 0 … 32.4 mm |
| Output type | 4-wire |
| Nominal ratings |
|---|
| Installation conditions | |
| B | 40 mm |
| C | 80 mm |
| F | 120 mm |
| Operating voltage | 10 … 60 V DC |
| Switching frequency | 0 … 10 Hz |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | pulsing |
| Voltage drop | ≤ 2.8 V |
| Operating current | 0 … 200 mA |
| No-load supply current | ≤ 20 mA |
| Switching state indicator | LED, yellow |
| Functional safety related parameters |
|---|
| MTTFd | 480 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
Indicators/operating means |
|---|
| Potentiometer | sensitivity adjustment |
| Compliance with standards and directives |
|---|
| Standard conformity | |
| Standards | EN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012 |
| Approvals and certificates |
|---|
| UL approval | cULus Listed, General Purpose |
| Ambient conditions |
|---|
| Ambient temperature | -25 … 70 °C (-13 … 158 °F) |
Mechanical specifications |
|---|
| Connection type | screw terminals |
| Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection!
tightening torque 1.2 Nm + 10 % |
| Core cross-section | up to 2.5 mm2 |
| Minimum core cross-section | without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2 |
| Maximum core cross-section | without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2 |
| Housing material | PBT/POM |
| Sensing face | POM |
| Housing base | PBT |
| Degree of protection | IP65 |
