Description
TECHNICAL DATA OF GF_VEDO SL 35CT
The integrated Controller and Operator Panel allows the complete management of automation. Available in 3 versions (35CT 3,5” color touch; 70CT 7” color touch for horizontal installation; V70CT 7” color touch for vertical installation), and equipped with a powerful 400 MHz processor.
It is destined mainly to operate in an industrial environment on the control panels of production process machines or processes.
The operator interacts through a colour touch screen. Depending on the model, the size of the screen is 3.5” or 7” wide.
As an option, the device can be equipped with programmable function buttons.
Thanks to its numerous communication ports (some of which are optional), it is possible to connect a wide range of devices to the controller, such as computers, barcode readers, USB sticks, modems, printers, etc., and connect it to an Ethernet network.
The remote input and output modules (CAN-IO/GILOGIK II) are connected by bus to the CAN port (CANopen). Other CANopen standard compliant devices can also be connected to the bus.
| | 35CT | 70CT-V70CT |
| POWER | Operating voltage | 24 Vdc ±25% |
| Absorbed current (at 24 Vdc) | 300 mA max | 350 mA max |
| Dissipated power | 7.5 W max | 8.5 W max |
| Protections | Protection for polarity inversion Short circuit |
| Connection | 3-pole polarised extractable connector Screw terminals, max wire section 2,5 mm² |
| BACK-UP BATTERY | Type | Rechargeable Li-Al 3 V 65 mA/h, type ML2032, non-replaceable |
| Duration | 10 years in absence of power: 20 months |
| CONNECTIONS | CAN port | Opto-isolated Connector: DB9 M Speed: 10 kbit/s … 1 Mbit/s Termination: to be managed externally |
| Ethernet port (ETH) | Connector: RJ45 Speed: 10 / 100 Mbit/s Signals: green connection LED, yellow data LED |
| RS-485 port (optional) | Opto-isolated Connector: DB9 M Speed: 9.6 kbit/s … 115 kbit/s |
| RS-232 port (optional) | Connector: DB9 M Speed: 9.6 kbit/s … 115 kbit/s |
| USB port (optional) | Connector: type A Standard: USB 2.0 |
| COMMUNICATIONS PROTOCOLS | Ethernet | FTP (File Transfer Protocol) Modbus TCP/IP Master/Slave |
| CAN | CANopen Master |
| Modbus | Modbus RTU Master/Slave |
| DISPLAY | Type | TFT touch screen with 4-wires resistive technology |
| Dimensions (diagonal) | 3.5” | 7” horizontal | 7” vertical |
| Resolution in pixels | 320 x 240 (QVGA) | 800×480(WVGA) | 480×800(WVGA) |
| Display area (L x H) | 70 x 52.5 mm | 152.4×91.4mm | 91.4×152.4mm |
| Colours | 262.000 |
| Brightness | 400 cd/m2 | 240 cd/m² |
| Contrast | 400:1 | 1000:1 |
| Backlighting | White LEDs, duration 50.000 hours @ 25 °C |
| Visual angle | Horizontal: 60° Vertical: 45°-60° | 85° in all directions |
| CONFIGURATION ELEMENTS | Procedure software access | 16-position dial |
| CONTROL ELEMENTS | Keypad (optional) | 6 programmable function buttons | 10 programmable function buttons |
| MICROPROCESSOR | Type | ARM9 |
| Frequency | 400MHz |
| MEMORY | Sistem | 64 MB, type SDRAM • 12 MB HMI application • 2.5 MB PLC applicative |
| Retentive | • 32 kB retentive variables (FLASH / FRAM) • 1 MB data logger (FLASH) |
| Mass | 128 MB, type FLASH • 32 MB for user |
| Mass extension | Slot SD Card (optional) |
| TECHNICAL DATA |
| | 35CT | 70CT-V70CT |
| ENVIRONMENTAL CONDITIONS | Operative temperature | 0 … +50 °C (according to IEC 68-2-14) |
| Storage temperature | -20 … +70 °C (according to IEC 68-2-14) |
| Relative humidity | max 95% RH non condensing (according to IEC 68-2-3) |
| ASSEMBLY | | Embedded, in control panels |
| DEGREE OF PROTECTION | | IP 65 on the front (according to IEC 68-2-3) |
| WEIGHT | | 0.25 kg | 0.5 kg |
| CE STANDARDS | EMC conformity (electromagnetic compatibility) | Observance of directive 2004/108/CE EMC Emission: EN 61000-6-4 EMC Immunity: EN 61131-2, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11 |
| LV conformity (low voltage) | Obseervance of 2006/95/CE Safety LVD: EN 61010-1 |
