| Output signal | VOLTAGE | CURRENT |
| Linearity | < ± 0.02% FS |
| Zero accuracy | < ± 0.1% FS |
| FS accuracy | < ± 0.1% FS |
| Accuracy at room temperature (1) | < ± 0.2% FS |
| Input bridge resistance | 120…1000 Ω |
| Signal input range (FS) | 0.1…3mV/V; 100µε…3000µε (@ with GF=2.00) |
| Output resolution | 16-Bit |
| Sampling rate | 5 kHz |
| Low-pass filter | 1 kHz |
| Case material | Aluminum anodized |
| Reset time | > 25 ms |
| Reset voltage | 12…36 VDC, |
| Supply voltage | 12…36 VDC |
| Power consumption | 0.5 W | 1W |
| Zero output signal | 0 V (N) | 4 mA (E) |
| Full scale output signal | + 10 V (N) stretching | 20 mA (E) stretching |
| – 10 V (N) compression | – |
| Allowed load | ≥5 kΩ | 0..500 Ω |
| Operating temperature range | -40…+85°C |
| Storage temperature range | -40…+100°C |
| Temperature effects (zero) | ± 0,01% FS/°C |
| Temperature effects (span) | ± 0,01% FS/°C |
| Weight | ~150 g |
| Protection class | IP65 |
| Output short circuit protection | Yes |
| Reverse polarity protection | Yes |
| Dielectric strenght (2) | 250V |
| EC Conformity | According to Directive 2014/30/EU |
| |
| (1) incl. Non-linearity, Hysteresis, Repeatability, Zero-offset and Span-offset |
| (2) Uses 50V 2J Voltage suppressor |
