| General specifications |
|---|
| Sensing range | 350 … 6000 mm |
| Adjustment range | 400 … 6000 mm |
| Dead band | 0 … 350 mm |
| Standard target plate | 100 mm x 100 mm |
| Transducer frequency | approx. 65 kHz |
| Response delay | approx. 650 ms |
| Indicators/operating means |
|---|
| LED green | solid green: Power on |
| LED yellow 1 | solid: switching state switch output 1
flashing: program function |
| LED yellow 2 | solid: switching state switch output 2
flashing: program function |
| LED red | normal operation: “fault”
program function: no object detected |
| Electrical specifications |
|---|
| Operating voltage | 10 … 30 V DC , ripple 10 %SS |
| No-load supply current | ≤ 60 mA |
| Input/Output |
|---|
| Synchronization | bi-directional
0 level -UB…+1 V
1 level: +4 V…+UB
input impedance: > 12 KOhm
synchronization pulse: ≥ 100 µs, synchronization interpulse period: ≥ 2 ms |
| Synchronization frequency | |
| Common mode operation | max. 7 Hz |
| Multiplex operation | ≤ 7/n Hz, n = number of sensors |
| Output |
|---|
| Output type | 2 switch outputs PNP, NO/NC selectable |
| Rated operating current | 200 mA , short-circuit/overload protected |
| Default setting | Switch point A1: 400 mm , Switch point A2: 6000 mm , wide sound lobe |
| Voltage drop | ≤ 2.5 V |
| Repeat accuracy | ≤ 0.5 % of switching point |
| Switching frequency | ≤ 0.6 Hz |
| Range hysteresis | 1 % of the set operating distance |
| Temperature influence | ± 1 % of full-scale value |
| Compliance with standards and directives |
|---|
| Standard conformity | |
| Standards | EN IEC 60947-5-2:2020
IEC 60947-5-2:2019 |
| Approvals and certificates |
|---|
| UL approval | cULus Listed, Class 2 Power Source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
|---|
| Ambient temperature | -25 … 70 °C (-13 … 158 °F) |
| Storage temperature | -40 … 85 °C (-40 … 185 °F) |
| Mechanical specifications |
|---|
| Connection type | Connector plug M12 x 1 , 5-pin |
| Degree of protection | IP54 |
| Material | |
| Housing | ABS |
| Transducer | epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT |
| Mass | 210 g |
