| OUTPUTS | 650 L |
| | Relay (R) Analog retransmission (A1) | Number: 4 max Type of relay contact: NO Max. current: 5 A, 250 VAC |
| Minimum load: 5 V, 10 mA Life cycle: > 100,000 operations Double isolation |
| Number: 1 max 0…10 V, max 20 mA, Rout: > 500 Ω 0…20 mA, 4…20 mA, Rout: < 500 Ω Resolution: 12 bit Isolated from main input |
| ALARMS | Number of alarm functions | 4 max, assignable to an output |
| Possible configurations | Maximum, minimum, symmetric, absolute/relative, exclusion at firing, memory, reset from keypad and/or contact, |
| CONTROL FUNCTIONS | 650 L |
| DIAGNOSTIC | | Short circuit or open circuit |
| RETENTIVE MEMORY | Type | EEPROM |
| Max. number of writes | 1,000.000 |
| SERIAL INTERFACE | 650 L |
| | | Type: RS485 Baudrate: 1200, 2400, 4800, 9600, 19.200, 38.400, 57.600,115.200 bit/s Protocoll: MODBUS RTU Isolated from main input |
| GENERAL DATA | 650 L |
| POWER SUPPLY | Operating voltage | 100…240 VAC/VDC ±10%, 50/60 Hz (on request 20…27 VAC/VDC ±10%) |
| Power dissipation | 5 W max |
| Protections | Overvoltage 300 V / 35 V |
| Connection | Screw terminals and crimp connector, max. wire section 1 mm2 |
| CONNECTIONS | Serial configuration port (for USB connection) | Connector: microUSB |
| Inputs and outputs | Screw terminals and crimp connector, max. wire section 2,5 mm2 |
| AMBIENT CONDITIONS | Use | Indoor |
| Altitude | 2000 m max |
| Operating temperature | -10 … +55 °C (as per IEC 68-2-14) |
| Storage temperature | -20 … +70 °C (as per IEC 68-2-14) |
| Relative humidity | 20…85% RH non-condensing (as per IEC 68-2-3) |
| PROTECTION LEVEL | | IP 65 on front panel (as per IEC 68-2-3) |
| ASSEMBLY | Positioning | On panel, removable faceplate |
| Installation regulations | Installation category: II; Pollution degree: 2 Isolation: double |
| DIMENSIONS | | 48 × 48 mm (1/16 DIN) (1.89” x 1.89”), Depth: 80 mm (3.15”) |
| WEIGHT | | 0.16 kg (35 lb) |
| CE STANDARDS | EMC (electromagnetic compatibility) | Conforms to directive 2014/30/EU with reference to standard EN 61326-1 emission in industrial environment class A for models 650 LV, 1250 emission in residential environment class B for models 650 HV |
| Safety LVD | conforms to directive 2014/35/EU with reference to standard EN61010-1 |
