{"id":1726,"date":"2021-09-26T04:48:46","date_gmt":"2021-09-26T04:48:46","guid":{"rendered":"https:\/\/newskyvn.com\/?post_type=product&p=1726"},"modified":"2021-09-26T04:50:09","modified_gmt":"2021-09-26T04:50:09","slug":"1650cc","status":"publish","type":"product","link":"https:\/\/newskyvn.com\/en\/product\/1650cc\/","title":{"rendered":"1650CC"},"content":{"rendered":"

<\/p>\n

Overview<\/h3>\n
\n

PID controller and measurement of carbon potential in metal heat treatment applications.
\nThe direct connection of the zirconium oxide probes, the efficient algorithm for percentage of carbon calculation inside the furnace combined with a precise PID control, provides a safe and compact control solution even for critical applications.<\/p>\n

Single \/ Dual loop PID controller<\/strong>
\nThanks to the third analog input, in addition to the temperature and mV signals required for zirconia probe management, the 1650CC controller is able to control both the Carbon Potential control loop and the furnace temperature control loop.<\/p>\n

Embedded Zirconia proble cleaning Burnoff sequence<\/strong>
\nThe zirconium oxygen probe is a particularly sensitive sensor and due to its installation inside a furnace with a carbon-rich atmosphere, after several hours of operation, it needs cyclic cleaning sequences to remove material deposition on the measuring element, a problem that can cause an error in the measurement of the carbon percentage or reduce the average life of the probe.
\nFor this purpose, the PID controller automatically manages the timed cleaning sequence, also handling the status of the calculated values, which must remain frozen during the cleaning phase.<\/p>\n

Zirconia probe diagnostics<\/strong>
\nProbe diagnostics, useful to verify and ensure the correct functionality of the measurement sensor. Two typical values are used to evaluate proper probe functionality, the impedance and the mV voltage recovery ramp after a Burnoff purge sequence.
\nDeviation of these values over time, indicating a probe problem, are monitored and reported as alarms by the new Carbon Controller series.\u00a0 Likewise, any errors during the cyclic purge phase are reported.<\/p>\n

Connectivity and Remote Service<\/strong>
\nModbus RTU master\/slave, Modbus TCP slave and Modbus RTU\/TCP bridge.
\nEmbedded Webserver interface for fast and easy remote assistance.<\/p>\n<\/div>\n

 <\/p>\n

TECHNICAL DATA OF 1650CC<\/strong><\/span><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
OPERATOR INTERFACE<\/em><\/strong><\/td>\n<\/tr>\n
\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

DISPLAY<\/strong><\/td>\n

Type<\/td>\nLCD black background<\/td>\n<\/tr>\n
Screen area (L x H)<\/td>\n37 \u00d7 68 mm<\/td>\n<\/tr>\n
Lighting<\/td>\nBacklit with LEDs, life > 40.000 hours @ 25 \u00b0C (with brightness level backl = 8)<\/td>\n<\/tr>\n
PV display<\/td>\nNumber of digits: 4 to 7 segments, with decimal point Digit height: 17 mm<\/p>\n

Color: white<\/td>\n<\/tr>\n

SV display<\/td>\nNumber of digits: 4 to 7 segments, with decimal point Digit height: 14 mm<\/p>\n

Color: green<\/td>\n<\/tr>\n

F display<\/td>\nNumber of digits: 5 to 14 segments, with decimal point Digit height: 9 mm<\/p>\n

Color: amber<\/td>\n<\/tr>\n

Unit of measurement<\/td>\nSelectable, C\u00b0 o F\u00b0<\/p>\n

Color: same as PV display<\/td>\n<\/tr>\n

Controller state signals<\/td>\nNumber: 6 (RUN, MAN, _\/-, REM, SP1\/2)<\/p>\n

Color: amber<\/td>\n<\/tr>\n

Output state signals<\/td>\nNumber: 4 (1, 2, 3, 4)<\/p>\n

Color: red<\/td>\n<\/tr>\n

Bargraph<\/p>\n

indicator, configurable<\/td>\n

Type: graphic bargraph,11 segments<\/p>\n

Power indication: 0 … 100% o -100 … 100%<\/p>\n

Current indication: 0 … 100% f.s.<\/p>\n

Valve position indication: 0 … 100%<\/td>\n<\/tr>\n

Bargraph indicator<\/td>\nType: double bar, 11 segments<\/p>\n

Indication of process variable and setpoint: 0…100% f.s.<\/td>\n<\/tr>\n

KEYPAD<\/strong><\/td>\n<\/td>\nKeys number: 4, silicone ( Man\/Auto, INC,DEC,F) Type: mechanical<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
INPUTS<\/em><\/strong><\/td>\n<\/tr>\n
\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

MAIN AND AUXILIARY INPUT<\/strong><\/p>\n

(Main, Aux1, Aux2)<\/strong><\/td>\n

Zirconium probe input (AUX2)<\/td>\n– 0. 2.4V high impedance<\/p>\n

– Input impedance: > 100 M\u03a9<\/p>\n

– Linearisation: linear or custom<\/p>\n

– Calibration accuracy: < 0.1% full scale<\/p>\n

– Thermal shift: < \u00b10.003% full scale\/\u00b0C starting from 25\u00b0C room temperature<\/p>\n

– impedance reading (0..100k\u03a9)<\/td>\n<\/tr>\n

Sensor type<\/td>\n\u2022\u00a0 Thermocouples, RTD (PT100, JPT100), IR pyrometers with type K output, 4\u202620mA, 0\u202620mA, 10V, 5V, 1V, 60mV, potenziometro<\/p>\n

\u2022\u00a0 Reading accuracy : \u00b10,1% of value read<\/p>\n

This Gefran controller, when subjected to the necessary calibration operations in the field, is suitable for use in Nadcap applications for any class of oven, from 1 to 6, according to specification AMS2750E, paragraph 3.3.1.<\/td>\n<\/tr>\n

Thermocouple<\/td>\n\u2022 Types : J, K, R, S, T, C, D, B, E, L, L-GOST, U, G, N,Pt20Rh-Pt40Rh Custom linearisation available<\/p>\n

\u2022 Linearisation accuracy: according to standard ITS90 polynomes; refer to user manual for details<\/p>\n

\u2022 Cool junction accuracy: < \u00b1 1\u00b0C a 25\u00b0C room temperature<\/p>\n

\u2022 Cool junction compensation : greater than 40:1 rejection at changes in room temperature exceeding 25\u00b0C<\/p>\n

Diagnostics: Indication of faulty probe and out of scale<\/td>\n<\/tr>\n

RTD input<\/p>\n

(Pt100 and JPt100)<\/td>\n

\u2022 Types: Pt100, JPt100. Custom linearisation available<\/p>\n

\u2022 Calibration accuracy: < \u00b10,1% del valore letto in \u00b0C \u00b1 0,4\u00b0C<\/p>\n

\u2022 Linearisation accuracy: <\u00b10,062\u00b0C<\/p>\n

\u2022 Thermal shift: < (\u00b10.002% of read value\/\u00b0C, starting from 25\u00b0C room temperature) \u00b1 0.1\u00b0C<\/p>\n

\u2022 Diagnostics: Indication of faulty probe and out of scale<\/td>\n<\/tr>\n

Linear DC input<\/td>\n\u2022 Types : 0…60 mV, 0\u202620mA, 4\u202620mA, 0\u20261V, 0\u20265V, 0\u202610V, 0\u20262.4V<\/p>\n

high impedance, 0\u20261.2V high impedance<\/p>\n

\u2022Input impedance :<\/p>\n

0\u202660mV, 0\u20261V, 0\u20261.2V, 0\u20262.4V : > 100 M\u03a9<\/p>\n

0\u20265V, 0\u202610V : > 400 k\u03a9<\/p>\n

0\u202620mA, 4\u202620mA : 50 \u03a9<\/p>\n

\u2022 Linearisation: linear or custom<\/p>\n

\u2022 Calibration accuracy: < 0.1% full scale<\/p>\n

\u2022 Thermal shift: <\u00b10.003% full scale\/\u00b0C, starting from 25\u00b0C room temperature<\/td>\n<\/tr>\n

Sampling time<\/td>\n60 ms or 120 ms, selectable<\/td>\n<\/tr>\n
Digital filter<\/td>\n0,0…20,0 s configurable<\/td>\n<\/tr>\n
Rejection at network disturbance (48-62Hz)<\/td>\nRejection at differential mode: >80 dB Rejection at common mode: >150 dB<\/td>\n<\/tr>\n
\u00a0<\/em><\/strong><\/p>\n

MAIN AND AUXILIARY INPUT<\/strong><\/p>\n

(Main, Aux1, Aux2)<\/strong><\/td>\n

Temperature unit of measure<\/td>\nGrado \u00b0C\/\u00b0F, selectable on the keypad<\/td>\n<\/tr>\n
Reading interval<\/td>\nTipe: linear<\/p>\n

Scale: -1999…9999, settable decimal point<\/td>\n<\/tr>\n

Insulation<\/td>\nFunctional insulation between main and auxiliary inputs<\/td>\n<\/tr>\n
\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

DIGITAL INPUTS<\/strong><\/td>\n

Number<\/td>\n5 max<\/td>\n<\/tr>\n
Type<\/td>\nVoltage-free contact, or NPN 24 V – 4,5 mA, o<\/p>\n

PNP 12\/24 V – max 3,6 mA<\/p>\n

For<\/em> detail<\/em> see<\/em> electrical<\/em> connections<\/em><\/td>\n<\/tr>\n

Isolation<\/td>\n250 V<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
OUTPUTS<\/em><\/strong><\/td>\n<\/tr>\n
<\/td>\nRelay (R)<\/td>\nNuumber: 4 max<\/p>\n

Type of relay contact: NO<\/p>\n

Max. current: 5A (2A at ambient temperature up to 45 \u00b0 C for certification UL), 250VAC \/ 30 VDC, cos\u03c6 = 1<\/p>\n

Minimum load: 5 V, 10 mA<\/p>\n

Number of operations: > 600,000 @ 2A load current Double isolation<\/p>\n

Installation of an external R-C suppressor (\u201csnubber\u201d) is recommended<\/td>\n<\/tr>\n

Logic (D)<\/td>\nNumber: 2 max<\/p>\n

Type: for solid-state relays<\/p>\n

Voltage: 24 V \u00b1<\/strong>10% (min 10 V @20 mA) Isolated from main input<\/td>\n<\/tr>\n

Isolated logic (M)<\/td>\nNumber: 2 max<\/p>\n

Type: MOS optoisolated for PLC inputs and AC\/DC load Voltage: 30 V AC\/DC max<\/p>\n

Current: 100 mA max Resistance ON: 0,8 \u03a9 max Isolation: 1500 V<\/td>\n<\/tr>\n

Triac ( long life rel\u00e8) (T)<\/td>\nNumber: 1 max Load: resistive Voltage: 75…240 VAC Current max: 1 A Isolation 3 kV<\/p>\n

Snubber circuit integrated Zero crossing switching<\/td>\n<\/tr>\n

Continuous (C)<\/td>\nNumber: 1 max Current: 4…20mA Rout < 500 \u2126<\/p>\n

Resolution: 12 bit<\/p>\n

Isolated from main input<\/td>\n<\/tr>\n

Analog retransmission (A1) (A2)<\/td>\nNumber: 2 max<\/p>\n

0…10 V, max 20 mA, Rout: > 500 \u03a9<\/p>\n

0…20 mA, 4…20 mA, Rout: < 500 \u03a9<\/p>\n

Resolution: 12 bit<\/p>\n

Isolated from main input<\/td>\n<\/tr>\n

\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

ALARMS<\/strong><\/td>\n

Number of alarm functions<\/td>\n4 max, assignable to an output<\/td>\n<\/tr>\n
Possible configurations<\/td>\nMaximum, minimum, symmetric, absolute\/relative, exclusion at<\/p>\n

firing, memory, reset from keypad and\/or contact, LBA, HB, HBB Hold Back Band if enabled with Programmer function, alarm after power variation at full power<\/p>\n

Zirconium probe diagnostics alarms, both during operation and when cleaning the probe<\/td>\n<\/tr>\n

\u00a0<\/em><\/strong><\/p>\n

POWER SUPPLY<\/strong><\/td>\n

For sensor VT1, VT2<\/td>\nVoltage: 24 VDC \u00b110% Current max: 30 mA VT1 option of Out3<\/td>\n<\/tr>\n
For potentiometer VP<\/td>\nVoltage: 1 VDC \u00b11% Current max: 30 mA<\/td>\n<\/tr>\n
CONTROL FUNCTIONS<\/em><\/strong><\/td>\n<\/tr>\n
\u00a0<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

CONTROL<\/strong><\/td>\n

Type<\/td>\nSingle loop, double loop<\/td>\n<\/tr>\n
Control<\/td>\nPID, ON\/OFF, single action heat or cool, double action heat\/cool<\/td>\n<\/tr>\n
Control output<\/td>\nContinuous or ON\/OFF<\/p>\n

Cycle time: constant or optimized (BF)<\/td>\n<\/tr>\n

Control output for motorized<\/p>\n

valves<\/td>\n

OPEN\/CLOSE for floating motorized valve or with feedback with position control by potentiometer on Relay, Solid-state, Triac outputs.<\/td>\n<\/tr>\n
\u00a0<\/em><\/strong><\/p>\n

SETPOINT PROGRAMMER<\/strong><\/p>\n

(Double programmer if double loop)<\/strong><\/td>\n

Number of programs<\/td>\nMax 16 (if double loop 8 + 8) (*)<\/p>\n

Start \/ Stop \/ Reset \/ Skip via digital inputs and\/or outputs from logic operations<\/p>\n

Output state: Run \/Hold \/ Ready \/ End<\/td>\n<\/tr>\n

Number of steps<\/td>\nMax 192, each with own setpoint, ramp time and hold time (**) Times settable in HH:MM or MM:SS<\/p>\n

Max 4 consents, configurable for ramp and for hold Max 4 events, configurable in ramp and in hold<\/td>\n<\/tr>\n

MULTIPLE SETPOINTS<\/strong><\/td>\nNumber of setpoints<\/td>\nMax 4, selectable from digital input<\/p>\n

Each setpoint change is subject to set ramp, different for up and down ramp<\/td>\n<\/tr>\n

LOGIC OPERATIONS <\/strong>1<\/strong><\/td>\nDigital function blocks<\/td>\nMax 32, with 4 input variables per block.<\/p>\n

The result can act on the state of the controller, of the programmer on alarms and outputs.<\/p>\n

Each function contains a block type AND, OR with TIMER<\/td>\n<\/tr>\n

OPERATIONS MATHEMATICAL <\/strong>1<\/strong><\/td>\nAnalog function blocks<\/td>\nMax 8, with 2 input variables per block, with operators such as + , – , \u00d7 , : , average, square root, …<\/p>\n

The result may act on analog variables in input to PID loops (controlled vari- able, setpoint) or analog outputs .<\/td>\n<\/tr>\n

\u00a0<\/em><\/strong><\/p>\n

TIMER FUNCTION<\/strong><\/td>\n

Modes<\/td>\nSTART \/ STOP (2 timer if double loop)<\/p>\n

STABILIZATION (timer is on when PV enters a band set around setpoint; at end of count you can activate an output, shut down SW or change SP1\/SP2)<\/p>\n

FIRING (timed activation of control after power on)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n\n\n\n\n\n
\u00a0<\/em><\/strong><\/p>\n

DIAGNOSTIC<\/strong><\/td>\n

<\/td>\nShort circuit or open circuit (LBA alarm) Interrupted or partially interrupted load (HB alarm) Short circuit of control output (SSR alarm)<\/td>\n<\/tr>\n
\u00a0<\/em><\/strong><\/p>\n

RETENTIVE MEMORY<\/strong><\/td>\n

Type<\/td>\nFRAM<\/td>\n<\/tr>\n
Max. number of writes<\/td>\nNumber max: > 1010\u00a0cycles Retention: > 10 anni<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

(*) if in standard mode; if in \u201cSimplified programmer\u201d mode, Max 12 programs<\/p>\n

 <\/p>\n

(**) freely selectable in any program, if in standard mode; if in \u201cSimplified programmer\u201d mode, MAX 16 steps per program, in a set order: Program 1 Step 1-16, Program 2 Step 17 \u2013 32, and so on<\/p>\n

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
GENERAL<\/em><\/strong> DATA<\/em><\/strong><\/td>\n<\/tr>\n
 <\/p>\n

 <\/p>\n

POWER SUPPLY<\/strong><\/td>\n

Operating voltage<\/td>\n100…240 VAC\/VDC \u00b110%, 50\/60 Hz<\/p>\n

(20…27 VAC\/VDC \u00b110%, 50\/60 Hz)<\/td>\n<\/tr>\n

Power dissipation<\/td>\n10 W max<\/td>\n<\/tr>\n
Protections<\/td>\nOvervoltage 300 V \/ 35 V<\/td>\n<\/tr>\n
Connection<\/td>\nScrew terminals and crimp connector, max. wire section 1 mm2<\/td>\n<\/tr>\n
 <\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

CONNECTIONS<\/strong><\/td>\n

Serial configuration port<\/td>\nConnector: microUSB<\/td>\n<\/tr>\n
RS485<\/p>\n

(option)<\/td>\n

Baudrate: 1200, 2400, 4800, 9600, 19.200, 38.400, 57.600, 115.200 bit\/s<\/p>\n

Protocol: Modbus RTU<\/p>\n

Insulation compared to main entrance<\/p>\n

Screw terminals and crimp connector, max. wire section 2.5mm2<\/td>\n<\/tr>\n

Master Modbus<\/td>\nBaudrate: 1200, 2400, 4800, 9600, 19.200, 38.400, 57.600, 115.200 bit\/s<\/p>\n

Protocol: Modbus RTU Master Connector: RJ10<\/td>\n<\/tr>\n

RTU Bridge<\/td>\nBaudrate: 1200, 2400, 4800, 9600, 19.200, 38.400, 57.600, 115.200 bit\/s<\/p>\n

Protocol: Modbus RTU Master<\/p>\n

Screw terminals and crimp connector, max. wire section 2.5mm2<\/td>\n<\/tr>\n

Ethernet Modbus TCP e Webserver<\/p>\n

(opzione)<\/td>\n

Baudrate : 10\/100BaseTX, 10\/100Mbit\/s<\/p>\n

Protocol : Modbus TCP slave, integrated Webserver Isolamento compared to other peripherals<\/p>\n

RJ45 Standard connector<\/td>\n<\/tr>\n

Inputs and outputs<\/td>\nScrew terminals and crimp connector, max. wire section 2.5mm2<\/td>\n<\/tr>\n
 <\/p>\n

AMBIENT CONDITIONS<\/strong><\/td>\n

Use<\/td>\nIndoor<\/td>\n<\/tr>\n
Altitude<\/td>\n2000 m max<\/td>\n<\/tr>\n
Operating temperature<\/td>\n-10 … +55 \u00b0C (as per IEC 68-2-14)<\/td>\n<\/tr>\n
Storage temperature<\/td>\n-20 … +70 \u00b0C (as per IEC 68-2-14)<\/td>\n<\/tr>\n
Relative humidity<\/td>\n20…85% RH non-condensing (as per IEC 68-2-3)<\/td>\n<\/tr>\n
PROTECTION LEVEL<\/strong><\/td>\n<\/td>\nIP 65 on front panel (as per IEC 68-2-3)<\/td>\n<\/tr>\n
 <\/p>\n

ASSEMBLY<\/strong><\/td>\n

Positioning<\/td>\nOn panel, removable faceplate<\/td>\n<\/tr>\n
Installation regulations<\/td>\nInstallation category: II Pollution degree: 2 Isolation: double<\/td>\n<\/tr>\n
DIMENSIONS<\/strong><\/td>\n<\/td>\n48 X 96 mm (1\/8 DIN)<\/p>\n

Depth: 80 mm<\/td>\n<\/tr>\n

WEIGHT<\/strong><\/td>\n<\/td>\n0,24 kg<\/td>\n<\/tr>\n
 <\/p>\n

CE STANDARDS<\/strong><\/td>\n

EMC conformity<\/p>\n

(electromagnetic compatibility)<\/td>\n

Conforms to Directive 2014\/30\/EU norme EN 61326-1 Emissions in industrial environment classe A<\/td>\n<\/tr>\n
LVD safety<\/td>\nConforms to Directive 2014\/35\/EU norme EN 61010-1<\/td>\n<\/tr>\n
 <\/p>\n

 <\/p>\n

CERTIFICATIONS<\/strong><\/td>\n

Generals<\/td>\nThis Gefran controller, when subjected to the necessary calibration opera- tions in the field, is suitable for use in Nadcap applications for any class of oven, from 1 to 6, according to specification AMS2750E, paragraph 3.3.1.<\/td>\n<\/tr>\n
Europe<\/td>\nCE, RoHS, REACH<\/td>\n<\/tr>\n
USA, Canada<\/td>\nUL, cUL<\/td>\n<\/tr>\n
Russia<\/td>\nEAC<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

1) Programming is done with the GF_eXpress configuration program.<\/p>\n

 <\/p>\n

\u00a0ACCESSORIES<\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Code<\/strong><\/td>\nDescription<\/strong><\/td>\nCompatible<\/strong><\/td>\n<\/tr>\n
1650CC<\/strong><\/td>\n1850CC<\/strong><\/td>\n<\/tr>\n
F060800<\/strong><\/td>\nCable for programming with PC, USB-TTL 3 V with USB \u2013 microUSB connectors, length 1.8 m<\/td>\n\u2022<\/td>\n\u2022<\/td>\n<\/tr>\n
F043958<\/strong><\/td>\n\u201cGF_eXpress\u201d software CD<\/td>\n\u2022<\/td>\n\u2022<\/td>\n<\/tr>\n
F060909<\/strong><\/td>\nConfiguration kit for new instruments GF_eXK-3-0-0<\/td>\n\u2022<\/td>\n\u2022<\/td>\n<\/tr>\n
51968<\/strong><\/td>\nRubber gasket 48\u00d748 front-box<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
51969<\/strong><\/td>\nRubber gasket 48\u00d796 front-box<\/td>\n\u2022<\/td>\n<\/td>\n<\/tr>\n
51970<\/strong><\/td>\nRubber gasket 96\u00d796 front-box<\/td>\n<\/td>\n\u2022<\/td>\n<\/tr>\n
51292<\/strong><\/td>\nRubber gasket 48\u00d748 box-panel<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
51068<\/strong><\/td>\nRubber gasket 48\u00d796 box-panel<\/td>\n\u2022<\/td>\n<\/td>\n<\/tr>\n
51069<\/strong><\/td>\nRubber gasket 99\u00d796 box-panel<\/td>\n<\/td>\n\u2022<\/td>\n<\/tr>\n
51250<\/strong><\/td>\nFastening box to panel<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
49030<\/strong><\/td>\nFastening box to panel<\/td>\n\u2022<\/td>\n\u2022<\/td>\n<\/tr>\n
51294<\/strong><\/td>\nProtection of contacts at box bottom<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
51328<\/strong><\/td>\nProtection of contacts at box bottom<\/td>\n\u2022<\/td>\n\u2022<\/td>\n<\/tr>\n
51454<\/strong><\/td>\n18 contacts at box bottom<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
51453<\/strong><\/td>\n24 contacts at box bottom<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
51738<\/strong><\/td>\n36 contacts at box bottom<\/td>\n\u2022<\/td>\n\u2022<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

<\/p>","protected":false},"excerpt":{"rendered":"

PID 1\/8 DIN Double temperature controller<\/strong><\/p>\n

    \n
  • high impedance input for Zirconium probe reading<\/li>\n
  • Carbon potential control and Dew Point reading<\/li>\n<\/ul>\n

    – Burnoff procedure for cleaning the Zirconium probe, with specific alarm settings to detect any probe malfunctions<\/p>\n

      \n
    • Operator interface with large LCD Display and three configurable bargraphs<\/li>\n
    • Scrolling diagnostics messages, configurable, in the selected language<\/li>\n
    • Preventive maintenance with energy counters (kWh) and load switching<\/li>\n
    • 32 function block applications<\/li>\n
    • 8 Math application blocks<\/li>\n
    • Timer, setpoint and algorithm programmer for controlling motorized valves<\/li>\n
    • Advanced tuning of control parameters<\/li>\n
    • Different password levels<\/li>\n
    • Inputs 3 and 1 already set by default for Zirconium probe (3) and thermocouple\n
        \n
      • reading to calculate the carbon potential<\/li>\n<\/ul>\n<\/li>\n
      • 2 PID control loops<\/li>\n
      • 2 setpoint programmers (192 steps in 16 programs, or 12 programs with 16 fixed steps each)<\/li>\n
      • Relay, logic, isolated analog outputs<\/li>\n
      • RS485 serial communication in Modbus RTU slave<\/li>\n
      • RS485 serial communication in Modbus RTU master for reading\/writing infor- mation to Modbus slave devices<\/li>\n
      • Ethernet Modbus TCP communication in Slave mode<\/li>\n
      • Web server for browser access to web pages residing in the devvice, for moni- toring and setting parameters<\/li>\n
      • Weekly clock\\calendar with RTC<\/li>\n
      • Removable faceplate for immediate replacement<\/li>\n
      • Accuracy 0,1%, sampling time 60 ms<\/li>\n<\/ul>\n","protected":false},"featured_media":1728,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_cat":[121,128],"product_tag":[],"yoast_head":"\n1650CC - NEW SKY CO.,LTD<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/newskyvn.com\/product\/1650cc\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"1650CC - NEW SKY CO.,LTD\" \/>\n<meta property=\"og:description\" content=\"[:vi]B\u1ed9 \u0111i\u1ec1u khi\u1ec3n nhi\u1ec7t \u0111\u1ed9 \u0111\u00f4i PID 1\/8 DIN \u2022 \u0111\u1ea7u v\u00e0o tr\u1edf kh\u00e1ng cao \u0111\u1ec3 \u0111\u1ecdc \u0111\u1ea7u d\u00f2 Zirconium \u2022 Ki\u1ec3m so\u00e1t ti\u1ec1m n\u0103ng carbon v\u00e0 \u0111\u1ecdc \u0111i\u1ec3m s\u01b0\u01a1ng - Quy tr\u00ecnh Burnoff \u0111\u1ec3 l\u00e0m s\u1ea1ch \u0111\u1ea7u d\u00f2 Zirconium, v\u1edbi c\u00e1c c\u00e0i \u0111\u1eb7t b\u00e1o \u0111\u1ed9ng c\u1ee5 th\u1ec3 \u0111\u1ec3 ph\u00e1t hi\u1ec7n b\u1ea5t k\u1ef3 tr\u1ee5c tr\u1eb7c n\u00e0o c\u1ee7a \u0111\u1ea7u d\u00f2 \u2022 Giao di\u1ec7n ng\u01b0\u1eddi v\u1eadn h\u00e0nh v\u1edbi M\u00e0n h\u00ecnh LCD l\u1edbn v\u00e0 ba thanh \u0111\u1ed3 th\u1ecb c\u00f3 th\u1ec3 \u0111\u1ecbnh c\u1ea5u h\u00ecnh \u2022 Cu\u1ed9n th\u00f4ng b\u00e1o ch\u1ea9n \u0111o\u00e1n, c\u00f3 th\u1ec3 \u0111\u1ecbnh c\u1ea5u h\u00ecnh, b\u1eb1ng ng\u00f4n ng\u1eef \u0111\u00e3 ch\u1ecdn \u2022 B\u1ea3o tr\u00ec ph\u00f2ng ng\u1eeba v\u1edbi b\u1ed9 \u0111\u1ebfm n\u0103ng l\u01b0\u1ee3ng (kWh) v\u00e0 chuy\u1ec3n \u0111\u1ed5i t\u1ea3i \u2022 32 \u1ee9ng d\u1ee5ng kh\u1ed1i ch\u1ee9c n\u0103ng \u2022 8 kh\u1ed1i \u1ee9ng d\u1ee5ng To\u00e1n h\u1ecdc \u2022 B\u1ed9 l\u1eadp tr\u00ecnh h\u1eb9n gi\u1edd, \u0111i\u1ec3m \u0111\u1eb7t v\u00e0 thu\u1eadt to\u00e1n \u0111\u1ec3 \u0111i\u1ec1u khi\u1ec3n van \u0111\u1ed9ng c\u01a1 \u2022 \u0110i\u1ec1u ch\u1ec9nh n\u00e2ng cao c\u00e1c th\u00f4ng s\u1ed1 \u0111i\u1ec1u khi\u1ec3n \u2022 C\u00e1c c\u1ea5p \u0111\u1ed9 m\u1eadt kh\u1ea9u kh\u00e1c nhau \u2022 \u0110\u1ea7u v\u00e0o 3 v\u00e0 1 \u0111\u00e3 \u0111\u01b0\u1ee3c \u0111\u1eb7t theo m\u1eb7c \u0111\u1ecbnh cho \u0111\u1ea7u d\u00f2 Zirconium (3) v\u00e0 c\u1eb7p nhi\u1ec7t \u0111i\u1ec7n (1) \u0111\u1ecdc \u0111\u1ec3 t\u00ednh to\u00e1n ti\u1ec1m n\u0103ng carbon \u2022 2 v\u00f2ng \u0111i\u1ec1u khi\u1ec3n PID \u2022 2 l\u1eadp tr\u00ecnh vi\u00ean setpoint (192 b\u01b0\u1edbc trong 16 ch\u01b0\u01a1ng tr\u00ecnh ho\u1eb7c 12 ch\u01b0\u01a1ng tr\u00ecnh v\u1edbi 16 b\u01b0\u1edbc c\u1ed1 \u0111\u1ecbnh m\u1ed7i ch\u01b0\u01a1ng tr\u00ecnh) \u2022 R\u01a1 le, logic, \u0111\u1ea7u ra t\u01b0\u01a1ng t\u1ef1 b\u1ecb c\u00f4 l\u1eadp \u2022 Giao ti\u1ebfp n\u1ed1i ti\u1ebfp RS485 trong Modbus RTU slave \u2022 Giao ti\u1ebfp n\u1ed1i ti\u1ebfp RS485 trong Modbus RTU master \u0111\u1ec3 \u0111\u1ecdc \/ ghi th\u00f4ng tin t\u1edbi c\u00e1c thi\u1ebft b\u1ecb Modbus slave \u2022 Giao ti\u1ebfp Ethernet Modbus TCP \u1edf ch\u1ebf \u0111\u1ed9 Slave \u2022 M\u00e1y ch\u1ee7 web \u0111\u1ec3 tr\u00ecnh duy\u1ec7t truy c\u1eadp v\u00e0o c\u00e1c trang web n\u1eb1m trong thi\u1ebft b\u1ecb, \u0111\u1ec3 th\u1ef1c hi\u1ec7n v\u00e0 c\u00e0i \u0111\u1eb7t c\u00e1c th\u00f4ng s\u1ed1 \u2022 \u0110\u1ed3ng h\u1ed3 h\u00e0ng tu\u1ea7n \\ l\u1ecbch v\u1edbi RTC \u2022 T\u1ea5m che m\u1eb7t c\u00f3 th\u1ec3 th\u00e1o r\u1eddi \u0111\u1ec3 thay th\u1ebf ngay l\u1eadp t\u1ee9c \u2022 \u0110\u1ed9 ch\u00ednh x\u00e1c 0,1%, th\u1eddi gian l\u1ea5y m\u1eabu 60 ms[:en]PID 1\/8 DIN Double temperature controller high impedance input for Zirconium probe reading Carbon potential control and Dew Point reading - Burnoff procedure for cleaning the Zirconium probe, with specific alarm settings to detect any probe malfunctions Operator interface with large LCD Display and three configurable bargraphs Scrolling diagnostics messages, configurable, in the selected language Preventive maintenance with energy counters (kWh) and load switching 32 function block applications 8 Math application blocks Timer, setpoint and algorithm programmer for controlling motorized valves Advanced tuning of control parameters Different password levels Inputs 3 and 1 already set by default for Zirconium probe (3) and thermocouple reading to calculate the carbon potential 2 PID control loops 2 setpoint programmers (192 steps in 16 programs, or 12 programs with 16 fixed steps each) Relay, logic, isolated analog outputs RS485 serial communication in Modbus RTU slave RS485 serial communication in Modbus RTU master for reading\/writing infor- mation to Modbus slave devices Ethernet Modbus TCP communication in Slave mode Web server for browser access to web pages residing in the devvice, for moni- toring and setting parameters Weekly clock\\calendar with RTC Removable faceplate for immediate replacement Accuracy 0,1%, sampling time 60 ms [:]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/newskyvn.com\/product\/1650cc\/\" \/>\n<meta property=\"og:site_name\" content=\"NEW SKY CO.,LTD\" \/>\n<meta property=\"article:modified_time\" content=\"2021-09-26T04:50:09+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/newskyvn.com\/wp-content\/uploads\/2021\/09\/show_Reg_1650CC_sito.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"497\" \/>\n\t<meta property=\"og:image:height\" content=\"500\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"9 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebSite\",\"@id\":\"https:\/\/newskyvn.com\/#website\",\"url\":\"https:\/\/newskyvn.com\/\",\"name\":\"NEW SKY CO.,LTD\",\"description\":\"C\\u00f4ng Ty TNHH S\\u1ea3n Xu\\u1ea5t Th\\u01b0\\u01a1ng M\\u1ea1i D\\u1ecbch V\\u1ee5 T\\u00e2n Thi\\u00ean\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/newskyvn.com\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-US\"},{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/newskyvn.com\/product\/1650cc\/#primaryimage\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/newskyvn.com\/wp-content\/uploads\/2021\/09\/show_Reg_1650CC_sito.jpg\",\"contentUrl\":\"https:\/\/newskyvn.com\/wp-content\/uploads\/2021\/09\/show_Reg_1650CC_sito.jpg\",\"width\":497,\"height\":500},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/newskyvn.com\/product\/1650cc\/#webpage\",\"url\":\"https:\/\/newskyvn.com\/product\/1650cc\/\",\"name\":\"1650CC - NEW SKY CO.,LTD\",\"isPartOf\":{\"@id\":\"https:\/\/newskyvn.com\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/newskyvn.com\/product\/1650cc\/#primaryimage\"},\"datePublished\":\"2021-09-26T04:48:46+00:00\",\"dateModified\":\"2021-09-26T04:50:09+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/newskyvn.com\/product\/1650cc\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/newskyvn.com\/product\/1650cc\/\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/newskyvn.com\/product\/1650cc\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Product\",\"item\":\"https:\/\/newskyvn.com\/en\/san-pham\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"1650CC\"}]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","_links":{"self":[{"href":"https:\/\/newskyvn.com\/en\/wp-json\/wp\/v2\/product\/1726"}],"collection":[{"href":"https:\/\/newskyvn.com\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/newskyvn.com\/en\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/newskyvn.com\/en\/wp-json\/wp\/v2\/comments?post=1726"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/newskyvn.com\/en\/wp-json\/wp\/v2\/media\/1728"}],"wp:attachment":[{"href":"https:\/\/newskyvn.com\/en\/wp-json\/wp\/v2\/media?parent=1726"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/newskyvn.com\/en\/wp-json\/wp\/v2\/product_cat?post=1726"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/newskyvn.com\/en\/wp-json\/wp\/v2\/product_tag?post=1726"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}